SIST-TS CEN/TS 17196:2019

Construction products - Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances

SIST-TS CEN/TS 17196:2019

Name:SIST-TS CEN/TS 17196:2019   Standard name:Construction products - Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances
Standard number:SIST-TS CEN/TS 17196:2019   language:English language
Release Date:09-Dec-2018   technical committee:NES - Dangerous substances
Drafting committee:   ICS number:13.020.99 - Other standards related to environmental protection
SLOVENSKI STANDARD
SIST-TS CEN/TS 17196:2019
01-januar-2019
*UDGEHQLSURL]YRGL2FHQMHYDQMHVSURãþDQMDQHYDUQLKVQRYL5D]NORS]
]ODWRWRSNR]DDQDOL]RDQRUJDQVNLKVQRYL
Construction products - Assessment of release of dangerous substances - Digestion by
aqua regia for subsequent analysis of inorganic substances
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Königswasser-
Aufschluss zur anschließenden Analyse von anorganischen Stoffen
Produits de construction - Evaluation de l’émission de substances dangereuses -
Digestion par l’eau régale pour une analyse ultérieure de substances inorganiques
Ta slovenski standard je istoveten z: CEN/TS 17196:2018
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
SIST-TS CEN/TS 17196:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 17196:2019

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 17196:2019


CEN/TS 17196
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

July 2018
TECHNISCHE SPEZIFIKATION
ICS 91.100.01
English Version

Construction products: Assessment of release of
dangerous substances - Digestion by aqua regia for
subsequent analysis of inorganic substances
Produits de construction - Evaluation de l'émission de Bauprodukte - Bewertung der Freisetzung von
substances dangereuses - Digestion par l'eau régale gefährlichen Stoffen - Königswasser-Aufschluss zur
pour une analyse ultérieure de substances anschließenden Analyse von anorganischen Stoffen
inorganiques
This Technical Specification (CEN/TS) was approved by CEN on 9 March 2018 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17196:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 17196:2019
CEN/TS 17196:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 7
5 Principle . 8
6 Interferences and sources of errors . 8
7 Reagents . 8
8 Apparatus .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27