SIST EN 61760-3:2010

Surface mounting technology - Part 3: Standard method for the specification of components for Through Hole Reflow (THR) soldering (IEC 61760-3:2010)

SIST EN 61760-3:2010

Name:SIST EN 61760-3:2010   Standard name:Surface mounting technology - Part 3: Standard method for the specification of components for Through Hole Reflow (THR) soldering (IEC 61760-3:2010)
Standard number:SIST EN 61760-3:2010   language:English language
Release Date:12-Jul-2010   technical committee:ITIV - Electronics assembly technology and Environmental standardization
Drafting committee:   ICS number:31.020 - Electronic components in general
SLOVENSKI STANDARD
SIST EN 61760-3:2010
01-september-2010
Tehnologija površinske montaže - 3. del: Standardne metode za specifikacijo
komponent za spajkanje "Through Hole Reflow" (THR) (IEC 61760-3:2010)
Surface mounting technology - Part 3: Standard method for the specification of
components for Through Hole Reflow (THR) soldering (IEC 61760-3:2010)
Oberflächenmontagetechnik - Teil 3: Genormtes Verfahren zur Spezifizierung von
Durchsteckmontage-Bauelementen für das Aufschmelzlöten (THR) (IEC 61760-3:2010)
Technique du montage en surface - Partie 3: Méthode normalisée relative à la
spécification des composants pour le brasage par refusion à trous traversants (THR,
Through Hole Reflow) (CEI 61760-3:2010)
Ta slovenski standard je istoveten z: EN 61760-3:2010
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
SIST EN 61760-3:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61760-3:2010

---------------------- Page: 2 ----------------------

SIST EN 61760-3:2010

EUROPEAN STANDARD
EN 61760-3

NORME EUROPÉENNE
April 2010
EUROPÄISCHE NORM

ICS 31.190


English version


Surface mounting technology -
Part 3: Standard method for the specification of components
for Through Hole Reflow (THR) soldering
(IEC 61760-3:2010)


Technique du montage en surface -  Oberflächenmontagetechnik -
Partie 3: Méthode normalisée relative Teil 3: Genormtes Verfahren
à la spécification des composants pour zur Spezifizierung
le brasage par refusion à trous traversants von Durchsteckmontage-Bauelementen
(THR, Through Hole Reflow) für das Aufschmelzlöten (THR)
(CEI 61760-3:2010) (IEC 61760-3:2010)




This European Standard was approved by CENELEC on 2010-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61760-3:2010 E

---------------------- Page: 3 ----------------------

SIST EN 61760-3:2010
EN 61760-3:2010 - 2 -
Foreword
The text of document 91/856/CDV, future edition 1 of IEC 61760-3, prepared by IEC TC 91, Electronics
assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61760-3 on 2010-04-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-01-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-04-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61760-3:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61760-3:2010
- 3 - EN 61760-3:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27