SIST EN 61300-2-18:2006

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-18: Tests - Dry heat - High temperature endurance

SIST EN 61300-2-18:2006

Name:SIST EN 61300-2-18:2006   Standard name:Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-18: Tests - Dry heat - High temperature endurance
Standard number:SIST EN 61300-2-18:2006   language:English language
Release Date:28-Feb-2006   technical committee:MOC - Mobile Communications
Drafting committee:   ICS number:33.180.20 - Fibre optic interconnecting devices
SLOVENSKI SIST EN 61300-2-18:2006

STANDARD
marec 2006
Naprave za medsebojno povezovanje optičnih kablov in pasivne komponente
– Osnovni preskusni in merilni postopki – 2-18. del: Preskusi – Suha vročina –
Vzdržljivost pri visoki temperaturi (IEC 61300-2-18:2005)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-18: Tests - Dry heat - High temperature
endurance (IEC 61300-2-18:2005)
ICS 33.180.20 Referenčna številka
SIST EN 61300-2-18:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61300-2-18
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2005

ICS 33.180.20 Supersedes EN 61300-2-18:1997


English version


Fibre optic interconnecting devices and passive components –
Basic test and measurement procedures
Part 2-18: Tests –
Dry heat –
High temperature endurance
(IEC 61300-2-18:2005)


Dispositifs d'interconnexion et Lichtwellenleiter-Verbindungselemente
composants passifs à fibres optiques - und passive Bauteile –
Méthodes fondamentales d'essais Grundlegende Prüf- und Messverfahren
et de mesures Teil 2-18: Prüfungen –
Partie 2-18: Essais – Trockene Wärme, Dauerprüfung
Chaleur sèche – (IEC 61300-2-18:2005)
Résistance à haute température
(CEI 61300-2-18:2005)



This European Standard was approved by CENELEC on 2005-08-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61300-2-18:2005 E

---------------------- Page: 2 ----------------------

EN 61300-2-18:2005 - 2 -
Foreword
The text of document 86B/2136/FDIS, future edition 2 of IEC 61300-2-18, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-18 on 2005-08-01.
This European Standard supersedes EN 61300-2-18:1997.
Specific technical changes in this European Standard involve simplification of the combination of
temperature and exposure time.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-18:2005 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-1 NOTE Harmonized as EN 61300-1:2003 (not modified).
IEC 61300-2-22 NOTE Harmonized as EN 61300-2-22:1995 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-2-18:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-2 - Basic environmental testing procedures EN 60068-2-2 1993
Part 2: Tests - T
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27