SIST EN 60947-1:2007

Low-voltage switchgear and controlgear -- Part 1: General rules

SIST EN 60947-1:2007

Name:SIST EN 60947-1:2007   Standard name:Low-voltage switchgear and controlgear -- Part 1: General rules
Standard number:SIST EN 60947-1:2007   language:English language
Release Date:18-Sep-2007   technical committee:SKA - Switchgear and control gear
Drafting committee:   ICS number:29.130.20 - Low voltage switchgear and controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Low-voltage switchgear and controlgear -- Part 1: General rules (IEC 60947-1:2007)Nizkonapetostne stikalne naprave – 1. del: Splošna pravila (IEC 60947-1:2007)Appareillage a basse tension -- Partie 1: Regles générales (IEC 60947-1:2007)Niederspannungsschaltgeräte -- Teil 1: Allgemeine Festlegungen (IEC 60947-1:2007)Ta slovenski standard je istoveten z:EN 60947-1:2007SIST EN 60947-1:2007en,fr,de29.130.20Nizkonapetostne stikalne in krmilne napraveLow voltage switchgear and controlgearICS:SIST EN 60947-1:20041DGRPHãþDSLOVENSKI
STANDARDSIST EN 60947-1:200701-november-2007







EUROPEAN STANDARD EN 60947-1 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2007
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60947-1:2007 E
ICS 29.130.20 Supersedes EN 60947-1:2004
English version
Low-voltage switchgear and controlgear -
Part 1: General rules (IEC 60947-1:2007)
Appareillage à basse tension -
Partie 1: Règles générales (CEI 60947-1:2007)
Niederspannungsschaltgeräte -
Teil 1: Allgemeine Festlegungen (IEC 60947-1:2007)
This European Standard was approved by CENELEC on 2007-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 60947-1:2007 - 2 -
Foreword The text of document 17B/1550/FDIS, future edition 5 of IEC 60947-1, prepared by SC 17B, Low-voltage switchgear and controlgear, of IEC TC 17, Switchgear and controlgear, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60947-1 on 2007-07-01. This European Standard supersedes EN 60947-1:2004. The main changes with respect to EN 60947-1:2004 are as follows: – modification and restructuration of 7.1; – introduction of new figures concerning EMC tests; – introduction of new Annexes Q, R and S. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-04-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2010-07-01 This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directives EMC (98/336/EEC) and EMC2 (2004/108/EC). See Annex ZZ. Annexes ZA and ZZ have been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60947-1:2007 was approved by CENELEC as a European Standard without any modification. __________



- 3 - EN 60947-1:2007 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-151 2001 International Electrotechnical Vocabulary (IEV) -
Part 151: Electrical and magnetic devices - -
IEC 60050-441 + A1 1984 2000 International Electrotechnical Vocabulary (IEV) -
Chapter 441: Switchgear, controlgear and fuses - -
IEC 60050-604 + A1 1987 1998 International Electrotechnical Vocabulary (IEV) -
Chapter 604: Generation, transmission and distribution of electricity - Operation - -
IEC 60050-826 2004 International Electrotechnical Vocabulary -
Part 826: Electrical installations - -
IEC 60060
Series High-voltage test techniques EN 60060 Series
IEC 60068-1 + corr. October + A1 1988 1
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27