SIST EN 12849:2009

Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions

SIST EN 12849:2009

Name:SIST EN 12849:2009   Standard name:Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions
Standard number:SIST EN 12849:2009   language:English language
Release Date:11-Jun-2009   technical committee:VLA - Water proofing
Drafting committee:   ICS number:75.140 - Waxes, bituminous materials and other petroleum products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.MDBitumen und bitumenhaltige Bindemittel - Bestimmung der Eindringfahigkeit von BitumenemulsionBitumes et liants bitumineux - Détermination du pouvoir de percolation des émulsions de bitumeBitumen and bituminous binders - Determination of penetration power of bituminous emulsions91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 12849:2009SIST EN 12849:2009en,fr,de01-julij-2009SIST EN 12849:2009SLOVENSKI
STANDARDSIST EN 12849:20031DGRPHãþD



SIST EN 12849:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12849March 2009ICS 75.140; 91.100.50Supersedes EN 12849:2002
English VersionBitumen and bituminous binders - Determination of penetrationpower of bituminous emulsionsBitumes et liants bitumineux - Détermination du pouvoir depercolation des émulsions de bitumeBitumen und bitumenhaltige Bindemittel - Bestimmung derEindringfähigkeit von BitumenemulsionenThis European Standard was approved by CEN on 17 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12849:2009: ESIST EN 12849:2009



EN 12849:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .4 5 Reagents and materials .4 6 Apparatus .5 7 Sampling .6 8 Procedure .6 9 Expression of results .6 10 Precision .7 11 Test report .7 Annex A (normative)
Characteristics of the Silica Sand Type F 34 .8 Annex B (normative)
Characteristics of the Testing Silica Filler 315-001 .9 Bibliography . 10
SIST EN 12849:2009



EN 12849:2009 (E) 3 Foreword This document (EN 12849:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12849:2002. From the previous edition, new reference filler is now specified; a mixture of silica sand and silica filler is used as reference filler. Characteristics of both silica sand and silica filler are given respectively in normative Annex A and Annex B. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 12849:2009



EN 12849:2009 (E) 4 1 Scope This European Standard specifies a method for the determination of the penetration power of bituminous emulsions, through reference filler. This test method is applicable to low-viscosity bituminous emulsions. WARNING — The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders - Sampling bituminous binders EN 12594, Bitumen and bituminous binders - Preparation of test samples 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 penetration power ability of a bitumen emulsion to penetrate into a reference filler 3.2 penetration time time, in minutes, required for a specified quantity of bituminous emulsion to penetrate into a defined quantity of a reference filler 4 Princi
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27