SIST EN 16307-5:2013

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

SIST EN 16307-5:2013

Name:SIST EN 16307-5:2013   Standard name:Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
Standard number:SIST EN 16307-5:2013   language:English language
Release Date:13-May-2013   technical committee:DTN - Lift and transport appliances
Drafting committee:   ICS number:53.060 - Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne zahteve za vozila, ki jih poganja pešecFlurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für Füßgängergeführte FlurförderzeugeChariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnantIndustrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks53.060Industrijski tovornjakiIndustrial trucksICS:Ta slovenski standard je istoveten z:EN 16307-5:2013SIST EN 16307-5:2013en,fr,de01-junij-2013SIST EN 16307-5:2013SLOVENSKI
STANDARD



SIST EN 16307-5:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16307-5
March 2013 ICS 53.060 English Version
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
Chariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnant
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge This European Standard was approved by CEN on 10 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16307-5:2013: ESIST EN 16307-5:2013



EN 16307-5:2013 (E) 2 Contents Page Foreword .3 0 Introduction .4 0.1 General .4 0.2 Assessment of hazards .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Safety requirements and/or protective measures .6 4.1 General .6 4.2 Protection against crushing, shearing and trapping .6 4.2.1 General .6 4.2.2 Pedestrian-propelled trucks with mast .6 4.3 Electrical requirements .6 4.4 Electromagnetic compatibility (EMC) .6 4.5 Operation in potentially explosi
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27