|
STANDARD
SIST EN 3372-002:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3372-002
July 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous -Part 002: Specification of performance and contact arrangements
Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes, température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 002 : Spécification de performances et arrangements des contacts
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 002: Leistungsdaten und Kontaktanordnungen This European Standard was approved by CEN on 24 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3372-002:2007: ESIST EN 3372-002:2009
EN 3372-002:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Description and codification of class.6 5 Operating conditions.6 6 Model codes.9 7 Polarization.10 8 Housing sizes and contact arrangements.11 9 Contact arrangements.12 10 Contacts.19 11 Sealing plugs.19 12 Cable outlet accessories.19 13 Assembly Tooling.19 14 Assembly and wiring instructions.19
SIST EN 3372-002:2009
EN 3372-002:2007 (E) 3 Foreword This document (EN 3372-002:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008, and conflicting national standards shall be withdrawn at the latest by January 2008. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3372-002:2009
EN 3372-002:2007 (E) 4 Introduction This family of connectors is similar to MIL-DTL-38999K series I, with which it is not intermateable or inter-changeable. 1 Scope This standard defines the performance and contact arrangements of circular electrical connectors coupled by bayonet ring. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-209, Aerospace series — Elements of electrical and optical connection — Test methods — Part 209: Current temperature derating EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification1) EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts EN 3155-008, Aerospace series — Electrical contacts used in elements of connection — Part 008: Contacts, electrical, male, type A, crimp, class S — Product standard EN 3155-009, Aerospace series — Electrical contacts used in elements of connection — Part 009: Contacts, electrical, female, type A, crimp, class S — Product standard EN 3155-012, Aerospace series — Electrical contacts used in elements of connection — Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R — Product standard EN 3155-013, Aerospace series — Electrical contacts used in elements of connection — Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R — Product standard EN 3155-024, Aerospace series — Electrical contacts used in elements of connection — Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S — Product standard EN 3155-025, Aerospace series — Electrical contacts used in elements of connection — Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S — Product standard EN 3197, Aerospace series — Installation of aircraft electrical and optical interconnection systems1) EN 3372-001, Aerospace series — Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175 °C or 200 °C continuous — Part 001: Technical specification EN 3372-003, Aerospace series — Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175 °C or 200 °C continuous — Part 003: Square flange receptacle — Product standard EN 3372-004, Aerospace series – Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175°C or 200°C continuous — Part 004: Re-ceptacle, hermetic, square flange mounting — Product standard2)
1) Published as an ASD Prestandard at the date of publication of this standard. SIST EN 3372-002:2009
EN 3372-002:2007 (E) 5 EN 3372-005, Aerospace series — Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175 °C or 200 °C continuous — Part 005: Re-ceptacle, hermetic, round flange, solder mounting — Product standard EN 3372-006, Aerospace series — Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175 °C or 200 °C continuous — Part 006: Protective cover for receptacle — Product standard EN 3372-007, Aerospace series — Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175 °C or 200 °C continuous — Part 007: Pro-tective cover for plug — Product standard EN 3372-008, Aerospace series — Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175 °C or 200 °C continuous — Part 008: Free plug with grounding spring — Product standard EN 3372-009, Aerospace series — Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175 °C or 200 °C continuous — Part 009: Re-ceptacle, jam nut mounting — Product standard EN 3372-010, Aerospace series — Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures − 65 °C to 175 °C or 200 °C continuous — Part 010: Re-ceptacle, hermetic, round flange, jam nut mounting — Product standard EN 3372-011, Aerospace series — Connectors, electrical, circular, medium an
...