SIST EN 60794-1-2:2017

Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance (IEC 60794-1-2:2017)

SIST EN 60794-1-2:2017

Name:SIST EN 60794-1-2:2017   Standard name:Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance (IEC 60794-1-2:2017)
Standard number:SIST EN 60794-1-2:2017   language:English language
Release Date:11-Apr-2017   technical committee:MOC - Mobile Communications
Drafting committee:   ICS number:33.180.10 - Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiterkabel - Teil 1-2: Fachgrundspezifikation - Kreuzverweistabelle für Prüfverfahren für Lichtwellenleiterkabel (IEC 60794-1-2:2017)Câbles à fibres optiques - Partie 1-2: Spécification générique - Table des références croisées relative aux procédures d'essais des câbles optiques (IEC 60794-1-2:2017)Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance (IEC 60794-1-2:2017)33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 60794-1-2:2017SIST EN 60794-1-2:2017en01-maj-2017SIST EN 60794-1-2:2017SLOVENSKI
STANDARDSIST EN 60794-1-2:20141DGRPHãþD



SIST EN 60794-1-2:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 60794-1-2
March 2017 ICS 33.180.10
Supersedes
EN 60794-1-2:2014
English Version
Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance (IEC 60794-1-2:2017)
Câbles à fibres optiques - Partie 1-2: Spécification générique - Procédures fondamentales d'essais des câbles optiques - Lignes directrices générales (IEC 60794-1-2:2017)
Lichtwellenleiterkabel - Teil 1-2: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Allgemeine Anleitung (IEC 60794-1-2:2017) This European Standard was approved by CENELEC on 2017-02-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60794-1-2:2017 E SIST EN 60794-1-2:2017



EN 60794-1-2:2017 2 European foreword The text of document 86A/1767/FDIS, future edition 4 of IEC 60794-1-2, prepared by SC 86A "Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-1-2:2017. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-11-16 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-02-16
This document supersedes EN 60794-1-2:2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60794-1-2:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated IEC 60794-1-21 NOTE Harmonized as EN 60794-1-21. IEC 60794-1-22 NOTE Harmonized as EN 60794-1-22. IEC 60794-1-23 NOTE Harmonized as EN 60794-1-23. IEC 60794-1-24 NOTE Harmonized as EN 60794-1-24.
SIST EN 60794-1-2:2017



EN 60794-1-2:2017 3
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60793-1-40 -
Optical f
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27