|
STANDARD
SIST EN 4530-006:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4530-006December 2006ICS 49.060 English VersionAerospace series - Sealing sleeves used in elements ofconnection - Part 006: Sealing sleeves for external diametercable 4,68 mm to 5,05 mm - Product standardSérie aérospatiale - Manchons d'étanchéité utilisés dansles organes de connexion - Partie 006 : Manchonsd'étanchéité pour câble de diamètre extérieur 4,68 mm à5,05 mm - Norme de produitLuft- und Raumfahrt - Dichtungshülse zur Verwendung inVerbindungselementen - Teil 006: Dichtungshülse fürLeitungen mit einem Aussendurchmesser von 4,68 mm bis5,05 mm - ProduktnormThis European Standard was approved by CEN on 24 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4530-006:2006: ESIST EN 4530-006:2009
EN 4530-006:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.4 5 Designation.7 6 Marking.7 7 Delivery conditions.7 8 Technical specification.7
SIST EN 4530-006:2009
EN 4530-006:2006 (E) 3 Foreword This document (EN 4530-006:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior
...