|
SIST EN 4530-005:2009
01-september-2009
Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 005. del: Tesnilne
puše za kable z zunanjim premerom od 3 mm do 4,1 mm - Standard za proizvod
Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing
sleeves for external diameter cable 3 mm to 4,1 mm - Product standard
Luft- und Raumfahrt - Dichtungshülsen zur Verwendung in Verbindungselementen - Teil
005: Dichtungshülsen für Leitungen mit einem Außendurchmesser von 3 mm bis 4,1 mm
- Produktnorm
Série aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion -
Partie 005 : Manchons d'étanchéité pour câbles de diamètre extérieur 3 mm à 4,1 mm -
Norme de produit
Ta slovenski standard je istoveten z: EN 4530-005:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 4530-005:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4530-005:2009
---------------------- Page: 2 ----------------------
SIST EN 4530-005:2009
EUROPEAN STANDARD
EN 4530-005
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 49.060
English Version
Aerospace series - Sealing sleeves used in elements of
connection - Part 005: Sealing sleeves for external diameter
cable 3 mm to 4,1 mm - Product standard
Série aérospatiale - Manchons d'étanchéité utilisés dans Luft- und Raumfahrt - Dichtungshülse zur Verwendung in
les organes de connexion - Partie 005 : Manchons Verbindungselementen - Teil 005: Dichtungshülse für
d'étanchéité pour câbles de diamètre extérieur 3 mm à 4,1 Leitungen mit einem Aussendurchmesser von 3 mm bis 4,1
mm - Norme de produit mm - Produktnorm
This European Standard was approved by CEN on 24 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4530-005:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4530-005:2009
EN 4530-005:2006 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Required characteristics.4
5 Designation .7
6 Marking .8
7 Delivery conditions.8
8 Technical specification .8
2
---------------------- Page: 4 ----------------------
SIST EN 4530-005:2009
EN 4530-005:2006 (E)
Foreword
This document (EN 4530-005:2006) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at
the latest by June 2007.
Attention is drawn to the possibil
...