SIST EN 60598-1:2015/A1:2018

Luminaires - Part 1: General requirements and tests (IEC 60598-1:2014/A1:2017)

SIST EN 60598-1:2015/A1:2018

Name:SIST EN 60598-1:2015/A1:2018   Standard name:Luminaires - Part 1: General requirements and tests (IEC 60598-1:2014/A1:2017)
Standard number:SIST EN 60598-1:2015/A1:2018   language:English language
Release Date:07-Mar-2018   technical committee:IESV - Lamps and related equipment
Drafting committee:   ICS number:29.140.40 - Luminaires
SLOVENSKI STANDARD
SIST EN 60598-1:2015/A1:2018
01-maj-2018
Svetilke - 1. del: Splošne zahteve in preskusi - Dopolnilo A1 (IEC 60598-
1:2014/A1:2017)
Luminaires - Part 1: General requirements and tests (IEC 60598-1:2014/A1:2017)
Leuchten - Teil 1: Allgemeine Anforderungen und Prüfungen (IEC 60598-
1:2014/A1:2017)
Luminaires - Partie 1: Exigences générales et essais (IEC 60598-1:2014/A1:2017)
Ta slovenski standard je istoveten z: EN 60598-1:2015/A1:2018
ICS:
29.140.40 Svetila Luminaires
SIST EN 60598-1:2015/A1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60598-1:2015/A1:2018

---------------------- Page: 2 ----------------------

SIST EN 60598-1:2015/A1:2018


EUROPEAN STANDARD EN 60598-1:2015/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2018
ICS 29.140.40

English Version
Luminaires - Part 1: General requirements and tests
(IEC 60598-1:2014/A1:2017)
Luminaires - Partie 1: Exigences générales et essais Leuchten - Teil 1: Allgemeine Anforderungen und
(IEC 60598-1:2014/A1:2017) Prüfungen
(IEC 60598-1:2014/A1:2017)
This amendment A1 modifies the European Standard EN 60598-1:2015; it was approved by CENELEC on 2017-10-20. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60598-1:2015/A1:2018 E

---------------------- Page: 3 ----------------------

SIST EN 60598-1:2015/A1:2018
EN 60598-1:2015/A1:2018 (E)
European foreword
The text of document 34D/1292/FDIS, future IEC 60598-1:2014/A1, prepared by SC 34D "Luminaires"
of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60598-1:2015/A1:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-08-23
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2021-02-23
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 60598-1:2014/A1:2017 was approved by CENELEC as a
European Standard without any modification.
In the Bibliography of EN 60598-1:2015, the following note has to be added for the standard indicated:
IEC 60664 Series NOTE Harmonized as EN 60664 Series.
2

---------------------- Page: 4 ----------------------

SIST EN 60598-1:2015/A1:2018
EN 60598-1:2015/A1:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27