|
STANDARD
SIST EN 4530-001:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4530-001May 2006ICS 49.060 English VersionAerospace series - Sealing sleeves used in elements ofconnection - Part 001: Technical specificationSérie aérospatiale - Manchons d'étanchéité utilisés dansles organes de connexion - Partie 001 : SpécificationtechniqueLuft- und Raumfahrt - Dichtungshülse zur Verwendung inVerbindungselementen - Teil 001: TechnischeLieferbedingungenThis European Standard was approved by CEN on 20 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4530-001:2006: ESIST EN 4530-001:2009
EN 4530-001:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Conditions of use and temperature classes.4 5 Design and description.5 6 Dimensions and mass.5 7 Operation.5 8 Tests.5 9 Quality assurance.8 10 Designation and marking.10 11 Delivery condition.10 12 Packaging.10 13 Storage.10
SIST EN 4530-001:2009
EN 4530-001:2006 (E) 3 Foreword This European Standard (EN 4530-001:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 4530-001:2009
EN 4530-001:2006 (E) 4 1 Scope This standard specifies: the electrical, mechanical, environmental and dimensional characteristics of sealing sleeves used in elements of connection; the conditions for qualification if the sealing sleeves are not tested during the connector qualification, acceptance testing and quality assurance; the test programme and groups. It is applicable to removable sealing sleeves used in connectors or in other elements of electrical connection. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100: General.
EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts. MIL-HDBK-454, General Guidelines for Electronic Equipment. 1)
3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 2591-100 and the following apply. 3.1 sealing sleeve device to prevent the ingress of contaminants and to facilitate the insertion and extraction of the contact 4 Conditions of use and temperature classes The sealing sleeves specified shall be from one of the classes specified below: class P: maximum operating temperature 125 °C; class R: maximum operating temperature 150 °C; class S: maximum operating temperature 200 °C; * And all parts quoted in this standard. 1) Published by Department of Defense (DOD)
...