SIST EN ISO 12460-3:2020

Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)

SIST EN ISO 12460-3:2020

Name:SIST EN ISO 12460-3:2020   Standard name:Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
Standard number:SIST EN ISO 12460-3:2020   language:English language
Release Date:15-Nov-2020   technical committee:LLZ - Les, lesni izdelki in zaščita lesa
Drafting committee:   ICS number:79.060.01 - Wood-based panels in general
SLOVENSKI STANDARD
SIST EN ISO 12460-3:2020
01-december-2020
Nadomešča:
SIST EN ISO 12460-3:2016
Lesne plošče - Ugotavljanje sproščanja formaldehida - 3. del: Metoda plinske
analize (ISO 12460-3:2020)
Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis
method (ISO 12460-3:2020)
Holzwerkstoffe - Bestimmung der Formaldehydabgabe - Teil 3: Gasanalyse-Verfahren
(ISO 12460-3:2020)
Panneaux à base de bois - Détermination du dégagement de formaldéhyde - Partie 3:
Méthode d'analyse de gaz (ISO 12460-3:2020)
Ta slovenski standard je istoveten z: EN ISO 12460-3:2020
ICS:
79.060.01 Lesne plošče na splošno Wood-based panels in
general
SIST EN ISO 12460-3:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12460-3:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 12460-3:2020


EN ISO 12460-3
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2020
EUROPÄISCHE NORM
ICS 79.060.01 Supersedes EN ISO 12460-3:2015
English Version

Wood-based panels - Determination of formaldehyde
release - Part 3: Gas analysis method (ISO 12460-3:2020)
Panneaux à base de bois - Détermination du Holzwerkstoffe - Bestimmung der Formaldehydabgabe
dégagement de formaldéhyde - Partie 3: Méthode - Teil 3: Gasanalyse-Verfahren (ISO 12460-3:2020)
d'analyse de gaz (ISO 12460-3:2020)
This European Standard was approved by CEN on 2 October 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12460-3:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 12460-3:2020
EN ISO 12460-3:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 12460-3:2020
EN ISO 12460-3:2020 (E)
European foreword
This document (EN ISO 12460-3:2020) has been prepared by Technical Committee ISO/TC 89 "Wood-
based panels" in collaboration with Technical Committee CEN/TC 112 “Wood-based panels” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12460-3:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12460-3:2020 has been approved by CEN as EN ISO 12460-3:2020 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 12460-3:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 12460-3:2020
INTERNATIONAL ISO
STANDARD 12460-3
Third edition
2020-10
Wood-based panels — Determination
o
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27