SIST EN 16005:2024

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

SIST EN 16005:2024

Name:SIST EN 16005:2024   Standard name:Power operated pedestrian doorsets - Safety in use - Requirements and test methods
Standard number:SIST EN 16005:2024   language:English language
Release Date:06-Feb-2024   technical committee:ISTP - Doors and windows
Drafting committee:   ICS number:91.060.50 - Doors and windows
SLOVENSKI STANDARD
SIST EN 16005:2024
01-marec-2024
Nadomešča:
SIST EN 16005:2013
SIST EN 16005:2013/AC:2015
Avtomatska vrata za prehod ljudi - Varnost pri uporabi - Zahteve in preskusne
metode
Power operated pedestrian doorsets - Safety in use - Requirements and test methods
Kraftbetätigte Türen - Nutzungssicherheit - Anforderungen und Prüfverfahren
Blocs-portes motorisés pour piétons - Sécurité d'utilisation - Exigences et méthodes
d'essai
Ta slovenski standard je istoveten z: EN 16005:2023
ICS:
91.060.50 Vrata in okna Doors and windows
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN 16005:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16005:2024

---------------------- Page: 2 ----------------------
SIST EN 16005:2024


EN 16005
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 91.060.50 Supersedes EN 16005:2012
English Version

Power operated pedestrian doorsets - Safety in use -
Requirements and test methods
Blocs-portes motorisés pour piétons - Sécurité Kraftbetätigte Türen - Nutzungssicherheit -
d'utilisation - Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 20 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16005:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16005:2024
EN 16005:2023 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 8
3 Terms and definitions . 9
4 List of significant hazards . 12
4.1 General. 12
4.2 Hazards caused by inadequate functional safety . 12
4.3 Hazards caused by source of energy and power controls . 12
4.4 Hazards caused by materials and shape of the door leaves . 12
4.4.1 Materials . 12
4.4.2 Shape of door leaves . 12
4.5 Hazards caused by uncontrolled movement of the door leaves . 12
4.6 Hazards caused by manual operation .
...

  • Relates Information
  • IEC 60300-3-7:1999

    IEC 60300-3-7:1999 - Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware Released:5/31/1999 Isbn:2831847974
    09-20
  • HD 571 S1:1990

    HD 571 S1:1998
    09-20
  • ISO 8130-4:1992

    ISO 8130-4:1992 - Coating powders
    09-20
  • HD 478.2.7 S1:1990

    HD 478.2.7 S1:2003
    09-19
  • ISO 8473:1988/Cor 1:1992

    ISO 8473:1988/Cor 1:1992 - Information processing systems — Data communications — Protocol for providing the connectionless-mode network service — Technical Corrigendum 1 Released:12/10/1992
    09-19
  • EN ISO 9013:2017/prA1

    EN ISO 9013:2017/oprA1:2024
    09-19
  • IEC 60118-6:1999

    IEC 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids Released:6/9/1999 Isbn:2831848075
    09-19
  • HD 280.3 S1:1990

    HD 280.3 S1:1999
    09-19
  • ISO 9832:1992

    ISO 9832:1992 - Animal and vegetable fats and oils -- Determination of residual technical hexane content
    09-19
  • EN 60188:1988/A1:1990

    EN 60188:1999/A1:1999
    09-18