SIST EN 3708-003:2009

Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard

Name：SIST EN 3708-003:2009   Standard name：Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard Standard number：SIST EN 3708-003:2009   language：English language Release Date：23-Jun-2009   technical committee：I13 - Imaginarni 13 Drafting committee：   ICS number：49.060 - Aerospace electric equipment and systems

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Modularni medsebojno povezljivi sistemi - Razdelilni moduli - 003. del: Snemljivi povratni skoznjiki, zatesnjeni - Standard za proizvodLuft- und Raumfahrt - Verteilersysteme in modularer Bauweise - Verteilermodule - Teil 003: Anreihbare Rückleitungsmodule, abgedichtet - ProduktnormSérie aérospatiale - Systèmes d'interconnexions modulaires - Barrettes de raccordement - Partie 003 : Version à modules amovibles à retour, étanches - Norme de produitAerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3708-003:2006SIST EN 3708-003:2009en,de01-september-2009SIST EN 3708-003:2009SLOVENSKI
STANDARD



SIST EN 3708-003:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3708-003May 2006ICS 49.060 English VersionAerospace series - Modular interconnection systems - Terminaljunction systems - Part 003: Removable feedback modulesversion, sealed - Product standardSérie aérospatiale - Systèmes d'interconnexionsmodulaires - Barrettes de raccordement - Partie 003 :Version à modules amovibles à retour, étanches - Normede produitLuft- und Raumfahrt - Verteilersystem in modularerBauweise - Verteilermodule - Teil 003: AnreihbareDurchführungsmodule, abgedichtet - ProduktnormThis European Standard was approved by CEN on 16 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3708-003:2006: ESIST EN 3708-003:2009



EN 3708-003:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.4 5 Designation.10 6 Marking.10 7 Delivery conditions.10 8 Packaging.10 9 Storage.10 10 Technical specification.10
SIST EN 3708-003:2009



EN 3708-003:2006 (E) 3 Foreword This European Standard (EN 3708-003:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. Acco
...