|
SIST EN 61290-1-3:2015
01-oktober-2015
1DGRPHãþD
SIST EN 61290-1-3:2006
2SWLþQLRMDþHYDOQLNL3UHVNXVQHPHWRGHGHO3DUDPHWULPRþLLQRMDþHQMD
0HWRGD]PHULOQLNRPRSWLþQHPRþL,(&
Optical amplifiers - Test methods - Part 1-3: Optical power and gain parameters - Optical
power meter method (IEC 61290-1-3:2015)
Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 1-3: Optische Leistungs- und
Verstärkerparameter - Verfahren mit optischem Leistungsmessgerät (IEC 61290-1-
3:2015)
Amplificateurs optiques - Méthodes d'essai - Partie 1-3: Paramètres de puissance et de
gain - Méthode par appareil de mesure de la puissance optique (IEC 61290-1-3:2015)
Ta slovenski standard je istoveten z: EN 61290-1-3:2015
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
SIST EN 61290-1-3:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61290-1-3:2015
---------------------- Page: 2 ----------------------
SIST EN 61290-1-3:2015
EUROPEAN STANDARD EN 61290-1-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2015
ICS 33.180.30 Supersedes EN 61290-1-3:2005
English Version
Optical amplifiers - Test methods - Part 1-3: Power and gain
parameters - Optical power meter method
(IEC 61290-1-3:2015)
Amplificateurs optiques - Méthodes d'essai - Partie 1-3: Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 1-3:
Paramètres de puissance et de gain - Méthode par appareil Optische Leistungs- und Verstärkerparameter - Verfahren
de mesure de la puissance optique mit optischem Leistungsmessgerät
(IEC 61290-1-3:2015) (IEC 61290-1-3:2015)
This European Standard was approved by CENELEC on 2015-03-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61290-1-3:2015 E
---------------------- Page: 3 ----------------------
SIST EN 61290-1-3:2015
EN 61290-1-3:2015
Foreword
The text of document 86C/1255/CDV, future edition 3 of IEC 61290-1-3, prepared by SC 86C "Fibre
optic systems and active devices” of IEC/TC 86 “Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61290-1-3:2015.
The following dates are fixed:
(dop) 2015-12-31
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-03-31
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61290-1-3:2005, with respect to which it constitutes a technical
revision including the following significant technical changes:
a) Detail description of most parameters has been provided in EN 61290-1 and removed from this
part;
b) Description of maximum output signal power and maximum total output power is added.
This document is to be used in conjunction with EN 61290-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61290-1-3:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-1-1 NOTE Harmonized as EN 60793-1-1.
IEC 60793-2-50 NOTE Harmonized as EN 60793-2-50.
IEC 60825-1 NOTE Harmo
...