SIST EN ISO 10240:2020

Small craft - Owner's manual (ISO 10240:2019)

SIST EN ISO 10240:2020

Name:SIST EN ISO 10240:2020   Standard name:Small craft - Owner's manual (ISO 10240:2019)
Standard number:SIST EN ISO 10240:2020   language:English language
Release Date:03-Feb-2020   technical committee:I13 - Imaginarni 13
Drafting committee:   ICS number:47.080 - Small craft
SLOVENSKI STANDARD
SIST EN ISO 10240:2020
01-marec-2020
Nadomešča:
SIST EN ISO 10240:2005
SIST EN ISO 10240:2005/A1:2015
Mala plovila - Priročnik za uporabo (ISO 10240:2019)
Small craft - Owner's manual (ISO 10240:2019)
Kleine Wasserfahrzeuge - Eignerhandbuch (ISO 10240:2019)
Petits navires - Manuel du propriétaire (ISO 10240:2019)
Ta slovenski standard je istoveten z: EN ISO 10240:2020
ICS:
47.080 Čolni Small craft
SIST EN ISO 10240:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10240:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 10240:2020


EN ISO 10240
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2020
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 10240:2004
English Version

Small craft - Owner's manual (ISO 10240:2019)
Petits navires - Manuel du propriétaire (ISO Kleine Wasserfahrzeuge - Eignerhandbuch (ISO
10240:2019) 10240:2019)
This European Standard was approved by CEN on 12 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10240:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10240:2020
EN ISO 10240:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10240:2020
EN ISO 10240:2020 (E)
European foreword
This document (EN ISO 10240:2020) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with Technical Committee CEN/SS T01 “Shipbuilding and maritime structures”
the secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2020, and conflicting national standards shall be
withdrawn at the latest by July 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10240:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10240:2019 has been approved by CEN as EN ISO 10240:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 10240:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 10240:2020
INTERNATIONAL ISO
STANDARD 10240
Third edition
2019-12
Small craft — Owner's manual
Petits navires — Manuel du propriétaire
Reference number
ISO 10240:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 10240:2020
ISO 10240:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mec
...

  • Relates Information
  • IEC 60300-3-7:1999

    IEC 60300-3-7:1999 - Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware Released:5/31/1999 Isbn:2831847974
    09-20
  • HD 571 S1:1990

    HD 571 S1:1998
    09-20
  • ISO 8130-4:1992

    ISO 8130-4:1992 - Coating powders
    09-20
  • HD 478.2.7 S1:1990

    HD 478.2.7 S1:2003
    09-19
  • ISO 8473:1988/Cor 1:1992

    ISO 8473:1988/Cor 1:1992 - Information processing systems — Data communications — Protocol for providing the connectionless-mode network service — Technical Corrigendum 1 Released:12/10/1992
    09-19
  • EN ISO 9013:2017/prA1

    EN ISO 9013:2017/oprA1:2024
    09-19
  • IEC 60118-6:1999

    IEC 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids Released:6/9/1999 Isbn:2831848075
    09-19
  • HD 280.3 S1:1990

    HD 280.3 S1:1999
    09-19
  • ISO 9832:1992

    ISO 9832:1992 - Animal and vegetable fats and oils -- Determination of residual technical hexane content
    09-19
  • EN 60188:1988/A1:1990

    EN 60188:1999/A1:1999
    09-18