SIST EN 61967-4:2005

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz -- Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method

SIST EN 61967-4:2005

Name:SIST EN 61967-4:2005   Standard name:Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz -- Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method
Standard number:SIST EN 61967-4:2005   language:English language
Release Date:30-Nov-2005   technical committee:I11 - Imaginarni 11
Drafting committee:   ICS number:31.200 - Integrated circuits. Microelectronics
SLOVENSKI SIST EN 61967-4:2005

STANDARD
december 2005
Integrirana vezja – Meritve elektromagnetnega sevanja, od 150 kHz do 1 GHz –
4. del: Meritve prevajanega sevanja – Metoda neposrednega sklopa 1 ohm/150
ohmov (IEC 61967-4:2002)
Integrated circuits – Measurement of electromagnetic emissions, 150 kKHz to 1
GHz – Part 4: Measurement of conducted emissions – 1 ohm/150 ohm direct
coupling method (IEC 61967-4:2002)
ICS 31.200 Referenčna številka
SIST EN 61967-4:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61967-4
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2002
ICS 31.200
English version
Integrated circuits -
Measurement of electromagnetic emissions, 150 kHz to 1 GHz
Part 4: Measurement of conducted emissions -
1 ohm/150 ohm direct coupling method
(IEC 61967-4:2002)
Circuits intégrés - Integrierte Schaltungen -
Mesure des émissions électromagnétiques, Messung von elektromagnetischen
150 kHz à 1 GHz Aussendungen im Frequenzbereich
Partie 4: Mesure des émissions conduites - von 150 kHz bis 1 GHz
Méthode par couplage direct Teil 4: Messung der leitungsgeführten
1 ohm/150 ohm Aussendungen -
(CEI 61967-4:2002) Messung mit direkter
1 Ohm/150 Ohm-Kopplung
(IEC 61967-4:2002)
This European Standard was approved by CENELEC on 2002-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61967-4:2002 E

---------------------- Page: 2 ----------------------

EN 61967-4:2002 - 2 -
Foreword
The text of document 47A/636/FDIS, future edition 1 of IEC 61967-4, prepared by SC 47A, Integrated
circuits, of IEC TC 47, Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61967-4 on 2002-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-06-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A and ZA are normative and annexes B, C, D and E are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61967-4:2002 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61967-4:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61000-4-6 - Electromagnetic compatibility (EMC) EN 61000-4-6 1996
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-
frequency fields
1) 2)
IEC 61967-1 - Integrated circuits - Measurement of EN 61967-1 2002
electromagnetic emissions, 150 kHz to
1 GHz
Part 1: Gene
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27