SIST EN 61967-4:2005/A1:2006

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz -- Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method

SIST EN 61967-4:2005/A1:2006

Name:SIST EN 61967-4:2005/A1:2006   Standard name:Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz -- Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method
Standard number:SIST EN 61967-4:2005/A1:2006   language:English language
Release Date:30-Jun-2006   technical committee:I11 - Imaginarni 11
Drafting committee:   ICS number:31.200 - Integrated circuits. Microelectronics
SLOVENSKI SIST EN 61967-4:2005/A1:2006

STANDARD
julij 2006
Integrirana vezja – Meritve elektromagnetnega sevanja od 150 kHz do 1 GHz –
4. del: Meritve prevajanega sevanja – Metoda neposrednega sklopa 1 ohm/150
ohmov (IEC 61967-4:2002)
Integrated circuits – Measurement of electromagnetic emissions, 150 kHz to 1 GHz
– Part 4: Measurement of conducted emissions – 1 ohm/150 ohm direct coupling
method (IEC 61967-4:2002/A1:2006)
ICS 31.200 Referenčna številka
SIST EN 61967-4:2005/A1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61967-4/A1

NORME EUROPÉENNE
February 2006
EUROPÄISCHE NORM

ICS 31.200


English version


Integrated circuits -
Measurement of electromagnetic emissions, 150 kHz to 1 GHz
Part 4: Measurement of conducted emissions -
1 ohm/150 ohm direct coupling method
(IEC 61967-4:2002/A1:2006)


Circuits intégrés -  Integrierte Schaltungen -
Mesure des émissions électromagnétiques, Messung von elektromagnetischen
150 kHz à 1 GHz Aussendungen im Frequenzbereich
Partie 4: Mesure des émissions conduites - von 150 kHz bis 1 GHz
Méthode par couplage direct Teil 4: Messung der leitungsgeführten
1 ohm/150 ohm Aussendungen -
(CEI 61967-4:2002/A1:2006) Messung mit direkter
1 Ohm/150 Ohm-Kopplung
(IEC 61967-4:2002/A1:2006)



This amendment A1 modifies the European Standard EN 61967-4:2002; it was approved by CENELEC on
2006-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61967-4:2002/A1:2006 E

---------------------- Page: 2 ----------------------

EN 61967-4:2002/A1:2006 - 2 -
Foreword
The text of document 47A/735/FDIS, future amendment 1 to IEC 61967-4:2002, prepared by SC 47A,
Integrated circuits, of IEC TC 47, Semiconductor devices, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as amendment A1 to EN 61967-4:2002 on 2006-02-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2009-02-01
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of amendment 1:2006 to the International Standard IEC 61967-4:2002 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



61967-4
INTERNATIONAL


2002
STANDARD


AMENDEMENT 1
AMENDMENT 1

2006-02

Amendement 1
Circuits intégrés – Mesure des émissions
électromagnétiques, 150 kHz à 1 GHz –
Partie 4:
Mesure des émissions conduites –
Méthode par couplage direct 1 Ω/150 Ω

Amendment 1
Integrated circuits – Measurement of
electromagnetic emissions, 150 kHz to 1 GHz –
Part 4:
Measurement of conducted emissions –
1 Ω/150 Ω direct coupling method
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 0
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27