|
STANDARD
SIST EN 60851-3:2009
EUROPEAN STANDARD EN 60851-3 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60851-3:2009 E
ICS 29.060.10 Supersedes EN 60851-3:1996 + A1:1997 + A2:2003
English version
Winding wires -
Test methods -
Part 3: Mechanical properties (IEC 60851-3:2009)
Fils de bobinage -
Méthodes d'essai -
Partie 3: Propriétés mécaniques (CEI 60851-3:2009)
Wickeldrähte -
Prüfverfahren -
Teil 3: Mechanische Eigenschaften (IEC 60851-3:2009)
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60851-3:2009
EN 60851-3:2009 – 2 – Foreword The text of document 55/1043/CDV, future edition 3 of IEC 60851-3, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60851-3 on 2009-04-01. This European Standard supersedes EN 60851-3:1996 + A1:1997 + A2:2003. With respect to EN 60851-3:1996, significant technical changes appear in Subclause 5.3, Jerk test. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2010-01-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2012-04-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60851-3:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60851-5 NOTE
Harmonized as EN 60851-5:2008 (not modified). IEC 61033 + A1 NOTE
Harmonized as EN 61033:2006 (not modified). __________ SIST EN 60851-3:2009
– 3 – EN 60851-3:2009
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60851-1 - 1) Winding wires - Test methods -
Part 1: General EN 60851-1 1996 2)
IEC 60851-2 1996 Winding wires - Test methods -
Part 2: Determination of dimensions EN 60851-2 1996
ISO 178 A1 2001 2004 Plastics - Determination of flexural
properties EN ISO 178 A1 2003 2005
1) Undated reference.
2) Valid edition at date of issue.
SIST EN 60851-3:2009
SIST EN 60851-3:2009
IEC 60851-3Edition 3.0 2009-01INTERNATIONAL STANDARD NORME INTERNATIONALEWinding wires – Test methods –
Part 3: Mechanical properties
Fils de bobinage – Méthodes d'essai –
Partie 3: Propriétés mécaniques
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XICS 29.060.10 PRICE CODECODE PRIXISBN 2-8318-1026-0
Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale SIST EN 60851-3:2009
– 2 – 60851-3 ©
...