|
Vijaki, 100° ugrezna glava, šestzoba vdolbina, kratek navoj, iz toplotnoodporne zlitine na nikljevi osnovi NI-PH2601 (Inconel 718) - Klasifikacija: 1270 MPa (pri temperaturi okolice)/650 °CLuft- und Raumfahrt – 100° Senkschrauben, kurzes Gewinde, Sechs-Bogenzahn, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718) - Klasse: 1270 MPa (bei Raumtemperatur)/650° CSérie aérospatiale - Vis, 100° à tête fraisée, à filetage court, à empreinte six lobes, en alliage résistant à chaud à base de nickel NI-PH2601 (Inconel 718) - Classification : 1270 Mpa (à température ambiante)/650°CAerospace series - Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1270 MPa (at ambient temperature)/650 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 4635:2009SIST EN 4635:2009en01-oktober-2009SIST EN 4635:2009SLOVENSKI
STANDARD
SIST EN 4635:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4635
July 2009 ICS 49.030.20 English Version
Aerospace series - Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 270 MPa (at ambient temperature) / 650 °C
Série aérospatiale - Vis, 100° à tête fraisée, à filetage court, à empreinte six lobes, en alliage résistant à chaud à base de nickel NI-PH2601 (Inconel 718) - Classification : 1 270 Mpa (à température ambiante) / 650 °C
Luft- und Raumfahrt – 100° Senkschrauben, kurzes Gewinde, Sechs-Bogenzahn, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718) - Klasse: 1 270 MPa (bei Raumtemperatur) / 650 °C This European Standard was approved by CEN on 12 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4635:2009: ESIST EN 4635:2009
EN 4635:2009 (E) Contents Page Foreword .31 Scope .42 Normative references .43 Required characteristics .43.1 Configuration – Dimensions – Tolerances – Masses .43.2 Materials .43.3 Surface treatment .43.4 Tolerances of form and position .54 Designation .65 Marking .76 Technical specification .7 SIST EN 4635:2009
EN 4635:2009 (E) 3 Foreword This document (EN 4635:200
...