|
SIST ISO 6953-1:2016
01-maj-2016
1DGRPHãþD
SIST ISO 6953-1:2001
)OXLGQDWHKQLND3QHYPDWLND5HJXODWRUMLWODNDLQUHJXODWRUMLWODNDVILOWULGHO
*ODYQH]QDþLOQRVWLNLPRUDMRELWLQDYHGHQHYGRNXPHQWDFLMLGREDYLWHOMHYLQQDþLQL
R]QDþHYDQMD
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 1:
Main characteristics to be included in literature from suppliers and product-marking
requirements
Transmissions pneumatiques - Régulateurs de pression et filtres-régulateurs pour air
comprimé - Partie 1: Principales caractéristiques à inclure dans la documentation des
fournisseurs et exigences de marquage du produit
Ta slovenski standard je istoveten z: ISO 6953-1:2015
ICS:
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
23.100.50 Krmilni sestavni deli Control components
SIST ISO 6953-1:2016 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 6953-1:2016
---------------------- Page: 2 ----------------------
SIST ISO 6953-1:2016
INTERNATIONAL ISO
STANDARD 6953-1
Third edition
2015-03-01
Pneumatic fluid power — Compressed
air pressure regulators and filter-
regulators —
Part 1:
Main characteristics to be included in
literature from suppliers and product-
marking requirements
Transmissions pneumatiques — Régulateurs de pression et filtres-
régulateurs pour air comprimé —
Partie 1: Principales caractéristiques à inclure dans la documentation
des fournisseurs et exigences de marquage du produit
Reference number
ISO 6953-1:2015(E)
©
ISO 2015
---------------------- Page: 3 ----------------------
SIST ISO 6953-1:2016
ISO 6953-1:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [email protected]
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 6953-1:2016
ISO 6953-1:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Technical requirements . 2
4.1 General . 2
4.2 General characteristics . 3
4.2.1 General dimensions . 3
4.2.2 Port forms . 5
4.2.3 Rated pressure . 5
4.2.4 Range of operating temperatures . 5
4.3 Pa
...