|
SIST EN 10025-4:2019
01-oktober-2019
Nadomešča:
SIST EN 10025-4:2004
Vroče valjani izdelki iz konstrukcijskih jekel - 4. del: Tehnični dobavni pogoji za
termomehansko obdelana valjana variva drobnozrnata konstrukcijska jekla
Hot rolled products of structural steels - Part 4: Technical delivery conditions for
thermomechanical rolled weldable fine grain structural steels
Warmgewalzte Erzeugnisse aus Baustählen - Teil 4: Technische Lieferbedingungen für
thermomechanisch gewalzte schweißgeeignete Feinkornbaustähle
Produits laminés à chaud en aciers de construction - Partie 4 : Conditions techniques de
livraison pour les aciers de construction soudable à grains fins obtenus par laminage
thermomécanique
Ta slovenski standard je istoveten z: EN 10025-4:2019
ICS:
77.140.10 Jekla za toplotno obdelavo Heat-treatable steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
SIST EN 10025-4:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 10025-4:2019
---------------------- Page: 2 ----------------------
SIST EN 10025-4:2019
EN 10025-4
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2019
EUROPÄISCHE NORM
ICS 77.140.10; 77.140.50 Supersedes EN 10025-4:2004
English Version
Hot rolled products of structural steels - Part 4: Technical
delivery conditions for thermomechanical rolled weldable
fine grain structural steels
Produits laminés à chaud en aciers de construction - Warmgewalzte Erzeugnisse aus Baustählen - Teil 4:
Partie 4 : Conditions techniques de livraison pour les Technische Lieferbedingungen für thermomechanisch
aciers de construction soudable à grains fins obtenus gewalzte schweißgeeignete Feinkornbaustähle
par laminage thermomécanique
This European Standard was approved by CEN on 16 June 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10025-4:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 10025-4:2019
EN 10025-4:2019 (E)
Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Classification and designation . 8
4.1 Classification . 8
4.1.1 Main quality classes . 8
4.1.2 Grades and qualities . 8
4.2 Designation . 9
5 Information to be supplied by t
...