SIST ES 282 003 V3.4.1:2009

Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) - Resource and Admission Control Sub-System (RACS) - Functional Architecture

SIST ES 282 003 V3.4.1:2009

Name:SIST ES 282 003 V3.4.1:2009   Standard name:Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) - Resource and Admission Control Sub-System (RACS) - Functional Architecture
Standard number:SIST ES 282 003 V3.4.1:2009   language:English language
Release Date:08-Oct-2009   technical committee:SPN - Services and Protocols for Networks
Drafting committee:   ICS number:33.040.01 - Telecommunication systems in general
ETSI ES 282 003 V3.4.1 (2009-09)
ETSI Standard


Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN);
Resource and Admission Control Sub-System (RACS):
Functional Architecture

---------------------- Page: 1 ----------------------
2 ETSI ES 282 003 V3.4.1 (2009-09)



Reference
RES/TISPAN-02072-NGN-R3
Keywords
architecture, control, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI ES 282 003 V3.4.1 (2009-09)
Contents
Intellectual Property Rights . 10
Foreword . 10
1 Scope . 11
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 12
3 Definitions and abbreviations . 12
3.1 Definitions . 12
3.2 Abbreviations . 14
4 General description of RACS . 16
4.1 Functional overview . 16
4.1.1 Global description . 16
4.1.2 Basic functionalitie s . 16
4.1.3 Restrictions applicable to the present document . 17
4.2 Functional Requirements . 17
4.2.1 R1 Requirements . 17
4.2.1.1 Overall . 17
4.2.1.2 Transport Control Service Requests . 17
4.2.1.3 Resource Handling . 18
4.2.1.4 QoS Management . 19
4.2.1.5 Traffic Handling . 19
4.2.1.6 Charging and Overload Control . 20
4.2.2 R2 Requirements . 20
4.2.2.1 Overall . 20
4.2.2.2 Resource Handling . 20
4.2.2.3 QoS Management . 20
4.2.2.4 e2e QoS Handling . 21
4.2.2.5 Multicast/Unicast Handling . 21
4.2.2.6 Topology and Resource Information Retrieval . 21
4.2.2.7 Network Deployment Scenarios . 22
4.2.2.8 Charging and Overload Control . 22
4.2.3 R3 Requirements . 22
4.2.3.1 Interaction with the CPN . 22
4.2.3.1.1 Direct control by RACS . 22
5 RACS functional architecture derivation basis . 22
5.1 Resource Control for Unicast and Multicast . 23
5.1.1 Resource control scenarios . 23
5.1.1.1 Identification of Resources . 23
5.1.1.2 Multicast Resource Admission Decision Specifics . 24
5.1.1.3 Resource Admission Decision Prerequisites . 24
5.1.1.4 Resource Admission Control Approaches . 25
5.1.1.5 Multicast Resource Admission Control in the Access Network Domain Transport Nodes . 25
5.1.1.6 Unicast/Multicast Resource Reuse in the Access Segment . 25
5.2 Charging . 26
5.3 QoS Management Functions in Fixed Access Networks. 26
5.4 Resource Control for QoS Downgrading . 28
6 RACS functional architecture definition . 29
6.1 General . 29
6.2 Functional elements . 31
6.2.1 SPDF . 31
6.2.1.1 SPDF main functions . 31
6.2.1.2 Summary of SPDF Elementary Functions . 31
6.2.1.3 Reference points . 33
ETSI

---------------------- Page: 3 ----------------------
4 ETSI ES 282 003 V3.4.1 (2009-09)
6.2.1.4 User profile . 33
6.2.1.5 Priority . 33
6.2.1.6 Service request . 34
6.2.1.7 Coordination function . 34
6.2.1.8 Charging . 35
6.2.1.9 Deployment considerations . 35
6.2.1.10 Overload control . 35
6.2.1.11 Discovery mechanism . 35
6.2.2 Generic Resource Admission Control Function . 35
6.2.2.1 Main functions . 35
6.2.2.1.1 Specializations of x-RACF . 36
6.2.2.1.2 Reference points applicable to different specializations of x-RACF . 36
6.2.2.1.3 Multiple instantiations of x-RACF . 36
6.2.2.2 Summary of generic Resource Admission Control Function Elementary Functions . 37
6.2.2.3 A-RACF . 39
6.2.2.3.1 A-RACF main functions . 39
6.2.2.3.2 Reference points . 39
6.2.2.4 C-RACF . 40
6.2.2.4.1 C-RACF main functions . 40
6.2.2.4.2 Reference points . 40
6.2.2.5 Admission control process . 40
6.2.2.5.1 A-RACF . 40
6.2.2.5.2 C-RACF. 42
6.2.2.6 Installation of policies . 42
6.2.2.7 Charging . 43
6.2.2.8 Abnormal condition handling. 43
6.2.2.9 Deployment considerations . 43
6.2.2.10 Overload control . 43
6.2.2.11 Discovery Mechanism . 43
6.2.3 BGF . 43
6.2.3.1 BGF main functions . 43
6.2.3.2 BGF parameters . 44
6.2.3.3 Reference points . 44
6.2.3.4 Addressing latching . 44
6.2.3.5 Abnormal conditions handling . 44
6.2.3.6 Overload control . 44
6.2.4 RCEF . 45
6.2.4.1 RCEF main functions . 45
6.2.4.2 Reference points . 45
6.2.4.3 RCEF parameters . 45
6.2.5 Application Function (AF) . 45
6.2.5.1 AF main functions . 45
6.2.5.2 Reference points . 46
6.2.5.3 Charging . 47
6.2.5.4 Abnormal conditions handling . 47
6.2.6 BTF . 47
6.3 RACS reference points . 47
6.3.1 Rq reference point (SPDF - x-RACF). 47
6.3.1.1 Functional requirements . 47
6.3.1.1.1 Resource management mechanisms . 47
6.3.1.1.2 Service model . 48
6.3.1.1.3 Duration semantics . 48
6.3.1.1.4 Audit and synchronization support . 49
6.3.1.1.5 Report facilities for unsolicited events . 49
6.3.1.2 Non-functional requirements. 49
6.3.1.2.1 Reliability requirements . 49
6.3.1.2.2 Security requirements . 49
6.3.1.3 Information exchanged over the Rq Reference Point . 49
6.3.1.3.1 Resource Reservation Request . 49
6.3.1.3.2 Resource Modification Request . 51
6.3.1.3.3 Resource Request/Modification Confirmation . 52
6.3.1.3.4 Resource Release Request . 52
ETSI

---------------------- Page: 4 ----------------------
5 ETSI ES 282 003 V3.4.1 (2009-09)
6.3.1.3.5 Abort Resource Reservation . 52
6.3.2 e4 reference point (A-RACF - NASS) . 53
6.3.3 Ia Reference Point (SPDF - BGF) . 53
6.3.3.1 Functional Requirements . 53
6.3.3.1.1 Control of NAT, Hosted NAT traversal and Gating . 53
6.3.3.1.2 Transport Protocol Type Policing . 53
6.3.3.1.3 Bandwidth control . 53
6.3.3.1.4 QoS marking . 53
6.3.3.1.5 Usage metering and statistics reporting . 53
6.3.3.1.6 Resource state synchronization . 54
6.3.3.2 Non-Functional Requirements . 54
6.3.3.2.1 Reliability requirements . 54
6.3.3.2.2 Security requirements . 54
6.3.3.3 Information exchanged over the Ia Reference Point . 54
6.3.3.3.1 BGF Service Request . 54
6.3.3.3.2 BGF Service Confirmation . 57
6.3.3.3.3 BGF Service Modify Request . 58
6.3.3.3.4 BGF Service Modify Confirmation . 59
6.3.3.3.5 BGF Service Audit Request . 60
6.3.3.3.6 BGF Service Audit Response . 61
6.3.3.3.7 BGF Service Notify Request . 62
6.3.3.3.8 BGF Service Notify Indication . 63
6.3.3.3.9 BGF Service Release Request . 63
6.3.3.3.10 BGF Service Release Confirmation. 64
6.3.4 Gq' Reference Point (AF - SPDF) . 65
6.3.4.1 Functional Requirements . 65
6.3.4.2 Non-Functional Requirements . 65
6.3.4.3 Information exchanged over the Gq' Reference Point . 65
6.3.5 Ri' Reference Point (SPDF-SPDF inter-domain) . 66
6.3.5.1 Functional Requirements . 66
6.3.5.1.1 Resource management mechanisms . 66
6.3.5.1.2 Service model . 66
6.3.5.1.3 Duration semantics . 66
6.3.5.1.4 Audit and Synchronization support . 67
6.3.5.1.5 Report facilities for unsolicited events . 67
6.3.5.2 Non-Functional Requirements . 67
6.3.5.2.1 Reliability requirements . 67
6.3.5.2.2 Security requirements . 67
6.3.5.3 Information exchanged over the Ri' Reference Point . 67
6.3.6 Rd' Reference Point (SPDF-SPDF intra-domain) . 67
6.3.6.1 Functional Requirements . 67
6.3.6.1.1 Resource management mechanisms . 67
6.3.6.1.2 Service model . 67
6.3.6.1.3 Duration semantics . 68
6.3.6.1.4 Audit and Synchronization support . 68
6.3.6.1.5 Report facilities for unsolicited events . 68
6.3.6.2 Non-Functional Requirements . 68
6.3.6.2.1 Reliability requirements . 68
6.3.6.2.2 Security requirements . 68
6.3.6.3 Information exchanged over the Rd' Reference Point . 68
6.3.7 Re Reference Point (x-RACF - RCEF) . 68
6.3.7.1 Functional Requirements . 68
6.3.7.1.1 Policy Enforcement Management. 68
6.3.7.2 Non-functional requirements. 69
6.3.7.2.1 Reliability requirements . 69
6.3.7.2.2 Security requirements . 69
6.3.7.3 Information exchanged over the Re Reference Point . 70
6.3.7.3.1 Information exchanged by using the push mode . 70
6.3.7.3.2 Information exchanged by using the pull mode . 76
6.3.7.3.3 Information exchanged by using both QoS mechanisms . 83
6.3.8 Rr Reference Point (x-RACF - x-RACF intra-domain) . 84
6.3.8.1 Functional Requirements . 84
ETSI

---------------------- Page: 5 ----------------------
6 ETSI ES 282 003 V3.4.1 (2009-09)
6.3.8.1.1 Overall features .
...

  • Relates Information
  • IEC 60300-3-7:1999

    IEC 60300-3-7:1999 - Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware Released:5/31/1999 Isbn:2831847974
    09-20
  • HD 571 S1:1990

    HD 571 S1:1998
    09-20
  • ISO 8130-4:1992

    ISO 8130-4:1992 - Coating powders
    09-20
  • HD 478.2.7 S1:1990

    HD 478.2.7 S1:2003
    09-19
  • ISO 8473:1988/Cor 1:1992

    ISO 8473:1988/Cor 1:1992 - Information processing systems — Data communications — Protocol for providing the connectionless-mode network service — Technical Corrigendum 1 Released:12/10/1992
    09-19
  • EN ISO 9013:2017/prA1

    EN ISO 9013:2017/oprA1:2024
    09-19
  • IEC 60118-6:1999

    IEC 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids Released:6/9/1999 Isbn:2831848075
    09-19
  • HD 280.3 S1:1990

    HD 280.3 S1:1999
    09-19
  • ISO 9832:1992

    ISO 9832:1992 - Animal and vegetable fats and oils -- Determination of residual technical hexane content
    09-19
  • EN 60188:1988/A1:1990

    EN 60188:1999/A1:1999
    09-18