|
STANDARD 12643-4
Second edition
2023-11
Graphic technology — Safety
requirements for graphic technology
equipment and systems —
Part 4:
Converting equipment and systems
Technologie graphique — Exigences de sécurité pour les systèmes et
l'équipement de technologie graphique —
Partie 4: Systèmes et équipement de façonnage
Reference number
ISO 12643-4:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 12643-4:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 12643-4:2023(E)
Contents Page
Foreword .viii
Introduction .x
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Significant hazards . 8
5 Equipment and interrelation between this document and ISO 12643-1:2023 .8
5.1 General . 8
5.2 Machines used primarily in a converting operation . 8
5.3 Machines used in both printing and converting processes . 8
6 Machinery for the production of corrugated board . 9
6.1 All machines . 9
6.1.1 Emergency stop . 9
6.1.2 Control zones with stop/safe pushbuttons . 9
6.1.3 Steam pipes . 10
6.2 Unwinding stations . 10
6.2.1 General . 10
6.2.2 Chucking cones and lifting arms . 10
6.2.3 Braking systems . 10
6.3 Splicers.
...