|
STANDARD 24322
First edition
Timber structures — Methods of
test for evaluation of long-term
performance — Part 1: Wood-based
products in bending
Structures en bois — Méthodes d'essai pour l'évaluation du
comportement à long terme — Partie 1: Produits à base de bois en
flexion
PROOF/ÉPREUVE
Reference number
ISO 24322:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 24322:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 24322:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols (and abbreviated terms) . 2
5 Reference population .3
6 Sampling . 4
6.1 Sampling method . 4
6.2 Matched groups within a sample . 4
6.3 Sample size . 4
7 Sample conditioning prior to testing .5
8 Bending tests . 5
8.1 Test method . 5
8.1.1 General . 5
8.1.2 Load location on specimens . 5
8.1.3 Load configuration . 5
8.1.4 Deformation measurements . 6
8.1.5 Reporting failure results .
...