ISO 22007-4:2024

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Light flash method

ISO 22007-4:2024

Name:ISO 22007-4:2024   Standard name:Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Light flash method
Standard number:ISO 22007-4:2024   language:English language
Release Date:10-Jan-2024   technical committee:ISO/TC 61/SC 5 - Physical-chemical properties
Drafting committee:ISO/TC 61/SC 5 - Physical-chemical properties   ICS number:83.080.01 - Plastics in general
INTERNATIONAL ISO
STANDARD 22007-4
Third edition
Plastics — Determination of thermal
conductivity and thermal diffusivity —
Part 4:
Light flash method
Plastiques — Détermination de la conductivité thermique et de la
diffusivité thermique —
Partie 4: Méthode par flash lumineux
PROOF/ÉPREUVE
Reference number
ISO 22007-4:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 22007-4:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22007-4:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 General . 2
5.2 Furnace or climatic chamber . 2
5.3 Flash source . 4
5.4 Transient detectors . 4
5.5 Thickness measurement device . 5
6 Test specimen . 5
6.1 Shape and dimension of the specimen . 5
6.2 Preparation and conditioning of test specimen . 5
6.3 Coating the specimen . 5
7 Calibration and verification . .6
7.1 Calibration of apparatus . 6
7.2 Verification of apparatus . 6
8 Procedure .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27