ISO/IEC 22592-2:2024

Office equipment — Print quality measurement methods for colour prints — Part 2: Registration and magnification accuracy

ISO/IEC 22592-2:2024

Name:ISO/IEC 22592-2:2024   Standard name:Office equipment — Print quality measurement methods for colour prints — Part 2: Registration and magnification accuracy
Standard number:ISO/IEC 22592-2:2024   language:English language
Release Date:25-Jan-2024   technical committee:ISO/IEC JTC 1/SC 28 - Office equipment
Drafting committee:ISO/IEC JTC 1/SC 28 - Office equipment   ICS number:37.100.10 - Reproduction equipment
INTERNATIONAL ISO/IEC
STANDARD 22592-2
First edition
Office equipment — Print quality
measurement methods for colour
prints —
Part 2:
Registration and magnification
accuracy
PROOF/ÉPREUVE
Reference number
ISO/IEC 22592-2:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 22592-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 22592-2:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Print preparation procedures .3
4.1 Printing environment . 3
4.2 Printing materials . 3
4.3 Printer settings . 3
4.4 Printing operations . 4
4.5 Conditioning the prints after printing. 4
5 General requirements for measurements .4
5.1 Measurement environmental conditions . 4
5.2 Scanner conformance . 4
5.2.1 General . 4
5.2.2 Test chart for scanner conformance . 5
5.2.3 Scanning equipment . 6
5.2.4 Scanning procedures . 6
5.2.5 Magnification accuracy of scanner . 7
5.2.6 Local magnification deviation of scanner . 7
5.2.7
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27