|
Standard
ISO 15614-5
Second edition
Specification and qualification of
2024-02
welding procedures for metallic
materials — Welding procedure
test —
Part 5:
Arc welding of titanium, zirconium
and their alloys
Descriptif et qualification d'un mode opératoire de soudage pour
les matériaux métalliques — Épreuve de qualification d'un mode
opératoire de soudage —
Partie 5: Soudage à l'arc sur titane, zirconium et leurs alliages
Reference number
ISO 15614-5:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 15614-5:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 15614-5:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Preliminary welding procedure specification (pWPS) . 2
5 Welding procedure test . 2
6 Test pieces . 2
6.1 General .2
6.2 Shape and dimensions of test pieces .2
6.2.1 General .2
6.2.2 Butt joint in plate with full penetration .3
6.2.3 Butt joint in pipe with full penetration .3
6.2.4 T-joint . . .3
6.2.5 Branch connection .3
6.3 Welding of test pieces .3
7 Examination and testing . 6
7.1 Extent of testing
...