|
Standard
ISO 8060
First edition
Composites and reinforcements
2024-03
fibres — Carbon fibre reinforced
plastics (CFRPs) and metal
assemblies — Characterization of
durability of adhesive interfaces by
wedge rupture test
Composites et fibres de renfort — Assemblages de plastiques
renforcés de fibres de carbone (CFRP) et de métal —
Caractérisation de la durabilité des interfaces adhésives à l'aide
d'un essai de clivage au coin
Reference number
ISO 8060:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 8060:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 8060:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions .1
3.2 Symbols .2
4 Principle . 2
5 Apparatus . 2
6 Specimens. 3
6.1 Number of specimens .3
6.2 Conditioning.3
6.3 Preparation of specimens .3
7 Testing procedure . 5
8 Test report . 6
Annex A (informative) Determination of thickness ratio (h /h) for CFRTP/Al adhesive joint
1 2
specimen .
...