ISO 4126-10:2024

Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow

ISO 4126-10:2024

Name:ISO 4126-10:2024   Standard name:Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow
Standard number:ISO 4126-10:2024   language:English language
Release Date:06-Mar-2024   technical committee:ISO/TC 185 - Safety devices for protection against excessive pressure
Drafting committee:ISO/TC 185/WG 1 - Two-phase flow   ICS number:13.240 - Protection against excessive pressure
International
Standard
ISO 4126-10
Second edition
Safety devices for protection against
2024-02
excessive pressure —
Part 10:
Sizing of safety valves and bursting
discs for gas/liquid two-phase flow
Dispositifs de sécurité pour protection contre les pressions
excessives —
Partie 10: Dimensionnement des soupapes de sûreté et des
disques de rupture pour les débits diphasiques gaz/liquide
Reference number
ISO 4126-10:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 4126-10:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 4126-10:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 S c op e . 1
2 Nor m at i ve r ef er enc e s . 1
3 T erms and definitions . 1
3.1 G eneral .1
3.2 Pressure .2
3 . 3 F low r at e .4
3 .4 F low a r e a .5
3.5 F luid state .5
3.6 T emperature .5
4 S ymbols and abbreviated terms and figures . 6
4.1 Symbols .6
4.2 A bbreviated terms .8
4.3 Figures .9
5 Application range of the method .11
5.1 G eneral .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27