|
Standard
ISO 16311-3
Second edition
Maintenance and repair of concrete
2024-03
structures —
Part 3:
Design of repairs
Entretien et réparation des structures en béton —
Partie 3: Conception des réparations
Reference number
ISO 16311-3:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 16311-3:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 16311-3:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Minimum considerations before repair design . 2
4.1 General .2
4.2 Initial risk assessment .2
4.3 Assessment of defects and their causes .2
5 Strategies for maintenance and repair . 3
5.1 General .3
5.2 Options.4
5.3 Factors .4
5.3.1 General .4
5.3.2 Structural . .4
5.3.3 Risk assessment .4
5.3.4 Environmental . . .4
5.4 Choice of appropriate strategy .
...