|
Standard
ISO 18134-2
Third edition
Solid biofuels — Determination of
2024-03
moisture content —
Part 2:
Simplified method
Biocombustibles solides — Dosage de la teneur en humidité —
Partie 2: Méthode simplifiée
Reference number
ISO 18134-2:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 18134-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 18134-2:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Sample preparation . 2
6.1 Sample reduction . .2
6.2 Pre-dried test sample .2
6.3 Mass of test portion . .2
7 Procedure . 2
7.1 Handling of test portion .2
7.2 Drying and weighing of test portion .3
8 Calculation . 3
8.1 General .3
8.2 Moisture content on a wet basis .3
8.3 Moisture content for pre-dried material .3
9 Performance characteristics .
...