ISO 13317-1:2024

Determination of particle size distribution by gravitational liquid sedimentation methods — Part 1: General principles, requirements and guidance

ISO 13317-1:2024

Name:ISO 13317-1:2024   Standard name:Determination of particle size distribution by gravitational liquid sedimentation methods — Part 1: General principles, requirements and guidance
Standard number:ISO 13317-1:2024   language:English language
Release Date:08-Apr-2024   technical committee:ISO/TC 24/SC 4 - Particle characterization
Drafting committee:ISO/TC 24/SC 4/WG 2 - Sedimentation, classification   ICS number:19.120 - Particle size analysis. Sieving
International
Standard
ISO 13317-1
Second edition
Determination of particle size
2024-04
distribution by gravitational liquid
sedimentation methods —
Part 1:
General principles, requirements
and guidance
Détermination de la distribution granulométrique par les
méthodes de sédimentation par gravité dans un liquide —
Partie 1: Principes généraux et orientation
Reference number
ISO 13317-1:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 13317-1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 13317-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms. 5
5 Measurement principle and technical realisations . 8
5.1 General measurement principle .8
5.2 Technical realisation of sedimentation-based measurement techniques .10
6 Measurement data and basic rules of data evaluation.13
6.1 Sedimentation velocity distribution . 13
6.2 Stokes-based analysis for obtaining particle size distributions .16
6.2.1 Particle size .16
6.2.2 Quantification of size fractions .17
6.3 Deviations from Stokes-based analysis .21
6.3.1 General .21
6.3.2 Upper limit for sedimentation velocity and particle size . 22
6.3.3 Lower limits for particle size . 22
6.3.4 Limits for particle concentration . 23
6.3.5 Handling of porous and heterogeneous particles .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27