|
Standard
ISO 18563-3
Second edition
Non-destructive testing —
2024-05
Characterization and verification
of ultrasonic phased array
equipment —
Part 3:
Complete systems
Essais non destructifs - Caractérisation et vérification de
l’appareillage ultrasonore multiélément —
Partie 3: Systèmes complets
Reference number
ISO 18563-3:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 18563-3:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 18563-3:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols . 2
5 General requirements for conformity . 3
5.1 General .3
5.2 Reference system .3
5.3 Identical system .3
5.4 Periodic checks .3
6 Qualification of test personnel . 4
7 Modes of operation for phased array techniques . 4
8 Equipment required for tests . 6
9 Tests to be performed . 6
9.1 General .6
9.2 External aspects of the equipment .8
9.2.1 General .8
9.2.2 Procedure .
...