|
Standard
ISO 11452-3
Fourth edition
Road vehicles — Component test
2024-05
methods for electrical disturbances
from narrowband radiated
electromagnetic energy —
Part 3:
Transverse electromagnetic
(TEM) cell
Véhicules routiers — Méthodes d'essai d'un équipement soumis
à des perturbations électriques par rayonnement d'énergie
électromagnétique en bande étroite —
Partie 3: Cellule électromagnétique transverse (TEM)
Reference number
ISO 11452-3:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 11452-3:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 11452-3:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test conditions . 1
5 Test apparatus . 2
5.1 TEM cell.2
5.2 Instrumentation .3
5.3 Test set-up .4
5.3.1 General .4
5.3.2 Exposure of device under test and wiring harness (for major field coupling to
the harness) .4
5.3.3 Exposure of device under test alone (for major field coupling to that device) .5
6 Test procedure . 6
6.1 Test plan .6
6.2 Test method .7
6.2.1 General .
...