ISO 13623:2017/Amd 1:2024

Petroleum and natural gas industries — Pipeline transportation systems — Amendment 1: Complementary requirements for the transportation of fluids containing carbon dioxide or hydrogen

ISO 13623:2017/Amd 1:2024

Name:ISO 13623:2017/Amd 1:2024   Standard name:Petroleum and natural gas industries — Pipeline transportation systems — Amendment 1: Complementary requirements for the transportation of fluids containing carbon dioxide or hydrogen
Standard number:ISO 13623:2017/Amd 1:2024   language:English language
Release Date:02-Jun-2024   technical committee:ISO/TC 67/SC 2 - Pipeline transportation systems
Drafting committee:ISO/TC 67/SC 2 - Pipeline transportation systems   ICS number:75.200 - Petroleum products and natural gas handling equipment
International
Standard
ISO 13623
Third edition
Petroleum and natural
2017-09
gas industries — Pipeline
transportation systems
AMENDMENT 1
2024-06
AMENDMENT 1: Complementary
requirements for the transportation
of fluids containing carbon dioxide or
hydrogen
Industries du pétrole et du gaz naturel — Systèmes de transport
par conduites
AMENDEMENT 1: Exigences complémentaires relatives au
transport de fluides contenant du dioxyde de carbone ou de
l'hydrogène
Reference number
ISO 13623:2017/Amd.1:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 13623:2017/Amd.1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 13623:2017/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 67, Oil and gas industries including lower carbon
energy, Subcommittee SC 2, Pipeline transportation systems.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

© ISO 2024 – All rights reserved
iii

---------------------- Page: 3 ----------------------
ISO 13623:2017/Amd.1:2024(en)
Petroleum and natural gas industries — Pipeline
transportation systems
AMENDMENT 1: Complementary requirements for the
transportation of fluids containing carbon dioxide or hydrogen

2 Normative references
Add the following documents:
ISO 27913, Carbon dioxide capture, transportation and geological storage — Pipeline transportation systems
API Spec 5L, 46th edition (2018), Specification for Line Pipe

5.2 Categorization of fluids
Add the following paragraph at the end of the subclause:
For category E fluids containing carbon dioxide exceeding the limit specified in G.1 the requirements in
Annex G shall apply
For category E fluids containing hydrogen exceeding the limit specified in H.2, Annex H shall apply.

8.1.6 Shear-fracture toughness
Designate the existing NOTE as NOTE 1 and add the following new NOTE:
NOTE 2 ISO 27913 provides guidance on determining the fracture-toughness requirements for the arrest
of running shear fractures in carbon dioxide pipelines.

Annex G
Add the following annex af
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27