|
Standard
ISO 26101-2
First edition
Acoustics — Test methods for
2024-06
the qualification of the acoustic
environment —
Part 2:
Determination of the environmental
correction
Acoustique — Méthodes d’essai pour la qualification de
l'environnement acoustique —
Partie 2: Détermination de la correction d’environnement
Reference number
ISO 26101-2:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 26101-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 26101-2:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Qualification procedures for the acoustic environment . 3
4.1 General .3
4.2 Absolute comparison test .3
4.3 Methods based on room absorption . .3
4.4 Inverse-square-law qualification of parallelepiped and cylindrical measurement
surfaces .3
4.5 Approximate method based on an estimation of the equivalent absorption area.3
5 Absolute comparison test . 4
5.1 General .4
5.2 Locations of reference sound source in test environment .5
5.3 Information to be recorded and reported .5
6 Determination of the environmental correction based on room absorption . 6
6.1 General .6
6.2 Reverberation method .6
6.3 Two-surface meth
...