|
Standard
ISO 22915-1
Third edition
Industrial trucks — Verification of
2024-06
stability —
Part 1:
General
Chariots de manutention — Vérification de la stabilité —
Partie 1: Généralités
Reference number
ISO 22915-1:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 22915-1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 22915-1:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Stability tests for trucks . 3
4.1 General .3
4.2 Test procedure .4
4.3 Verification procedure . . .4
4.3.1 Operation of the tilt table and test criteria .4
4.3.2 Calculation .5
4.3.3 Other methods .5
4.4 Test conditions .5
4.4.1 Condition of the truck .5
4.4.2 Position of the truck on the tilt table .5
4.4.3 Test load, lift height and standard load centre distance .6
4.5 Safety precautions for testing .7
4.6 Stability verification for trucks with attachments .7
4.7 Stability verification for low-lift trucks .8
5 Documentation .
...