|
International
Standard
ISO 1514
Sixth edition
Paints and varnishes — Standard
2024-07
panels for testing
Peintures et vernis — Panneaux normalisés pour essai
Reference number
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Steel panels . 2
4.1 Properties .2
4.2 Storage prior to preparation .2
4.3 Preparation by solvent cleaning .2
4.4 Preparation by aqueous cleaning (spray or immersion process) .3
4.5 Preparation by abrasion .3
4.5.1 General .3
4.5.2 Hand abrasion .3
4.5.3 Circular mechanical abrasion .4
4.5.4 Linear grinding .4
4.6 Inspection and cleaning .4
4.7 Preparation by phosphate treatment .4
4.7.1 General .4
4.7.2 Amorphous iron phosphate treatment .4
4.8 Preparation by blast-cleaning .4
5 Tinplate panels . 4
5.1 Properties .4
5.2 Preparation by solvent or aqueous cleaning .5
5.3 Preparation by abrasion .5
6 Zinc- and zinc-alloy-coated panels . 5
6.1 Properties .5
6.2 Preparation by solvent cleaning .5
6.3 Preparation by aqueous cleaning .5
7 Aluminium panels . 6
7.1 Properties .6
7.2 Preparation by solvent cleaning .6
7.3 Preparation by aqueous cleaning .6
7.4 Preparation by abrasion .6
8 Coil-coating panels of steel or aluminium . 6
8.1 Properties .6
8.2 Coating .6
8.3 Substrate .7
8.4 Preparation by solvent cleaning .7
9 Plastics panels . 7
9.1 Properties .7
9.2 Preparation by solvent cleaning .7
9.3 Preparation by detergent cleaning .7
9.4 Pre-treatment by flaming .7
10 Glass-fibre reinforced plastic composite panels (GRP) . 7
10.1 Properties .7
10.2 Preparation by solvent cleaning .7
10.3 Preparation by detergent cleaning .7
11 Carbon-fibre reinforced plastic composite panels (CFRP) . 8
11.1 Properties .8
11.2 Preparation by solvent cleaning .8
iii
11.3 Preparation by detergent cleaning .8
12 Glass panels . 8
12.1 Properties .8
12.2 Preparation by solvent cleaning .8
12.3 Preparation by detergent cleaning .8
13 Hardboard. 8
13.1 Properties .8
13.2 Preparation .8
14 Gypsum plasterboards panels and gypsum boards with fibrous reinforcement panels . 9
14.1 Properties .9
14.2 Preparation .9
15 Fibre-reinforced cement panels . 9
16 Concrete . 9
Annex A (informative) General guidelines on preparation of steel panels by blast-cleaning .10
Annex B (informative) Common substrate panels .11
Bibliography .12
iv
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work
...