ISO/IEC TS 17012:2024

Conformity assessment — Guidelines for the use of remote auditing methods in auditing management systems

ISO/IEC TS 17012:2024

Name:ISO/IEC TS 17012:2024   Standard name:Conformity assessment — Guidelines for the use of remote auditing methods in auditing management systems
Standard number:ISO/IEC TS 17012:2024   language:English language
Release Date:08-Jul-2024   technical committee:ISO/CASCO - Committee on conformity assessment
Drafting committee:ISO/CASCO - Committee on conformity assessment   ICS number:03.120.20 - Product and company certification. Conformity assessment

Technical
Specification
ISO/IEC TS 17012
First edition
Conformity assessment —
2024-07
Guidelines for the use of remote
auditing methods in auditing
management systems
Reference number
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO/IEC 2024 – All rights reserved
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principles of auditing . 2
5 Managing an audit programme . 2
5.1 General .2
5.2 Establishing audit programme objectives .2
5.3 Determining and evaluating audit programme risks and opportunities .3
5.4 Establishing the audit programme .5
5.5 Implementation of audit programme .5
5.6 Monitoring the audit programme .6
5.7 Reviewing and improving audit programme .6
6 Conducting an audit using remote auditing methods . 6
6.1 General .6
6.2 Initiating audit .7
6.3 Preparing audit activities .7
6.3.1 Performing review of documented information .7
6.3.2 Audit planning .7
6.4 Conducting audit activities .8
6.4.1 General .8
6.4.2 Assigning roles and responsibilities of support personnel and observers .9
6.4.3 Conducting the opening meeting .9
6.4.4 Communicating during the audit .10
6.4.5 Audit information availability and access .10
6.4.6 Reviewing documented information while conducting the audit .10
6.4.7 Collecting and verifying information.10
6.4.8 Generating audit findings .11
6.4.9 Determining audit conclusions .11
6.4.10 Conducting the closing meeting.11
6.5 Preparing and distributing audit report .11
6.6 Completing audit .11
6.7 Conducting audit follow-up . 12
7 Competence and evaluation of auditors .12
7.1 General . 12
7.2 Determining auditor competence . 12
7.2.1 General . 12
7.2.2 Personal behaviour . 12
7.2.3 Knowledge and skills . 13
7.2.4 Achieving auditor competence .14
7.2.5 Achieving audit team leader competence .14
7.3 Establishing auditor evaluation criteria .14
7.4 Selecting the appropriate auditor evaluation methods .14
7.5 Conducting auditor evaluation .14
7.6 Maintaining and improving auditor competence . 15
Annex A (informative) Remote auditing methods .16
Annex B (informative) Useful practices .20
Bibliography .24

© ISO/IEC 2024 – All rights reserved
iii
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or /members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
In the IEC, see /understanding-standards.
This document was prepared by the ISO Committee on Conformity Assessment (CASCO).
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html and
/national-committees.

© ISO/IEC 2024 – All rights reserved
iv
Introduction
This document was developed in response to rapidly developing technology and changes in working
practices based upon a variety of experiences, including those from the coronavirus pandemic. Applying
remote auditing methods can bring a variety of benefits for all parties involved in the audit. This document
provides guidance on how an audit can be effectively conducted and how audit objectives can be achieved
when remote auditing methods are used.
Remote auditing methods can improve the efficiency of an audit by reducing travel-time and expense and
achieving an improvement in the overall carbon footprint, as well as avoiding travel risk, enabling virtual
access to more sites. A further benefit is facilitating diversity of participation in the audit and the increased
involvement of technical experts within the audit. This includes cross-border activities that can improve the
overall efficiency of the audit, whilst maintaining business continuity, especially in challenging situations
and conditions.
The objective of this document is to provide assurance that remote auditing methods represent an additional
sustainable and flexible way to conduct audits of management systems and provide confidence to customers,
regulators, scheme owners and other interested parties.
This document includes guidance on a risk-based approach to be followed for planning and implementing the
remote auditing methods that can apply to all types and sizes of organizations. Table 1 and Table 2 provide
examples of risks and opportunities.
This document can be used to support an on-site, a remote or a hybrid approach to auditing management
systems.
NOTE ISO 19011:2018, Table 1 gives examples of different types of audits.
This document can al
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27