ISO/IEC 23773-1:2024

Information technology — User interfaces for automatic simultaneous interpretation systems — Part 1: General

ISO/IEC 23773-1:2024

Name:ISO/IEC 23773-1:2024   Standard name:Information technology — User interfaces for automatic simultaneous interpretation systems — Part 1: General
Standard number:ISO/IEC 23773-1:2024   language:English language
Release Date:15-Jul-2024   technical committee:ISO/IEC JTC 1/SC 35 - User interfaces
Drafting committee:ISO/IEC JTC 1/SC 35 - User interfaces   ICS number:35.240.30 - IT applications in information, documentation and publishing

International
Standard
ISO/IEC 23773-1
First edition
Information technology —
2024-07
User interfaces for automatic
simultaneous interpretation
systems —
Part 1:
General
Technologies de l'information — Interfaces utilisateur pour les
systèmes d'interprétation simultanée automatique —
Partie 1: Généralités
Reference number
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO/IEC 2024 – All rights reserved
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 General description of automatic simultaneous interpretation . 2
6 Service flows and scenarios of automatic simultaneous interpretation systems . 2
6.1 Service situations .2
6.2 Service flows and scenarios .4
7 General functions of automatic simultaneous interpretation systems . 5
Bibliography . 7

© ISO/IEC 2024 – All rights reserved
iii
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or /members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
In the IEC, see /understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 35, User interfaces.
A list of all parts in the ISO/IEC 23773 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html and
/national-committees.

© ISO/IEC 2024 – All rights reserved
iv
Introduction
Communication between users of different languages is a global trend that is increasing. Real-time, automatic
simultaneous interpretation is needed for different applications such as video calls, live lecture translation
and wearable translation devices. Market demands for real-time automatic simultaneous interpretation
of free-style continuous utterances in the travel sector, global event management, phone calls, lectures or
meetings are also increasing. A standardized user interface (UI) for automatic simultaneous interpretation
systems fulfils these different needs for communication.
The ISO/IEC 23773 series consists of the following parts:
ISO/IEC 23773-1 (this document) provides a general description of automatic simultaneous interpretation
systems designed to interoperate among different natural languages for spontaneous speech and texts.
ISO/IEC 23773-2 provides the requirements and functional components for the UI of automatic simultaneous
interpretation systems.
ISO/IEC 23773-3 provides a reference architecture for automatic simultaneous interpretation systems
including functional modules and communication interfaces in a high-level approach.

© ISO/IEC 2024 – All rights reserved
v
International Standard ISO/IEC 23773-1:2024(en)
Information technology — User interfaces for automatic
simultaneous interpretation systems —
Part 1:
General
1 Scope
This document provides the general description of real-time automatic simultaneous interpretation systems
designed to interoperate among different natural languages for spontaneous speech.
While traditional speech to speech machine translation addresses the functional equivalent of consecutive
interpretation, this document focuses on the functional equivalent of simultaneous interpretation.
This document does not cover sign language interpr
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27