ISO 37005:2024

Governance of organizations — Developing indicators for effective governance

ISO 37005:2024

Name:ISO 37005:2024   Standard name:Governance of organizations — Developing indicators for effective governance
Standard number:ISO 37005:2024   language:English language
Release Date:30-Jul-2024   technical committee:ISO/TC 309 - Governance of organizations
Drafting committee:ISO/TC 309 - Governance of organizations   ICS number:03.100.02 - Governance and ethics

International
Standard
ISO 37005
First edition
Governance of organizations —
2024-07
Developing indicators for effective
governance
Gouvernance des organismes — Élaboration d'indicateurs d'une
gouvernance efficace
Reference number
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Understanding indicators . 3
4.1 General .3
4.2 Structure of indicators .4
4.3 Impact of indicators on decision making .4
4.4 Stages in the development and use of indicators .5
5 A taxonomy of types of indicators . 5
5.1 Means to ends – inputs to impacts . .5
5.2 Subjective or objective indicators .6
6 Using the taxonomy . 6
6.1 General .6
6.2 Choosing an indicator .7
6.3 What type of indicators .7
6.3.1 General .7
6.3.2 Indicators of impact .9
6.4 Characteristics of an indicator .9
6.4.1 General .9
6.4.2 Assurable .10
6.4.3 Timely .10
6.4.4 Comparisons .10
6.5 Risks arising from indicator selection and use .10
6.5.1 General .10
6.5.2 Unintended consequences .10
6.5.3 Lack of accountability .11
6.5.4 Non-alignment of purpose and sustainability .11
6.5.5 Selecting indicators to measure against purpose or to measure effectiveness .11
6.5.6 Indicators of the method used to achieve the organization’s purpose . 12
6.5.7 Too much information . 12
7 Selection of indicators by governing bodies using ISO 37000:2021 .12
7.1 General . 12
7.2 Aspects related to decision making . . 13
7.3 Aspects related to strategy, partnership and collaborations . 15
7.4 Aspects related to organizational strategy and relevant indicators . 15
7.5 Selecting indicators . 15
8 Using indicators . 16
8.1 Choosing one option over others .16
8.2 Decisions following an assessment of performance .16
9 Implementation . .16
Bibliography .18

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 309, Governance of organizations.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found atwww.iso.org/members.html.

iv
Introduction
The purpose of indicators is to enable measurement that helps an organization to establish, implement,
maintain, and improve an effective governance framework and the conditions and practices enabling the
organization to fulfil its purpose. By following the guidance in this document organizations can realize the
governance principles as set out in ISO 37000.
This document provides a means to assess how an organization’s governance framework contributes most
effectively to the fulfilment of the organization's purpose. It covers:
— a taxonomy for the classification of different types of indicators;
— the context in which they are used, including the purpose of the organization and its appetite for risk
given impacts on all stakeholders;
— the risk appetite and tolerance of the organization and stakeholders;
— the limitations of indicators;
— choosing or developing meaningful indicators.
The role of an organization’s governing body is to establish, implement and maintain the organizational
governance framework, conditions and practices so that the organization can fulfil its purpose. In
performing this role the governing body has to make decisions and choose between available options,
as many times there will not be one solution. The indicators used will be part of the process to generate
those options and part of the mechanism to guide the choice between options. Governing bodies should
measure performance against objectives, which requires indicators. ISO 37000 helps to create cross-sector
international consensus on the role and results of organizational governance. However, the organizational
outcomes of organizational governance depend on the decisions made by governing bodies, the information
used to support those decisions as well as their execution. These decisions mean making choices between
the intended performance of alternative options for the same organizational purpose. A mechanism is
required to compare these options, in order to choose the optimal one for the specific context.
There is always the possibility that the choice made between options does not represent the "best"
choice or that the execution is not effective. Effective governance therefore requires an understanding of
appropriate indicators in the context of that possibility and the risk appetite of the governing body. Effective
consideration of indicators linked to organizational purpose, stakeholder issues, materiality and risk
appetite/tolerance reduces the extent to which a governing body can make decisions without the full range
of material information. It also enhances a dynamic monitoring approach.
Indicators are used and understood in various ways. Ultimately the governing body is seeking to achieve the
organizati
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27