ISO/R 19:1956

Withdrawal of ISO/R 19-1956

ISO/R 19:1956

Name:ISO/R 19:1956   Standard name:Withdrawal of ISO/R 19-1956
Standard number:ISO/R 19:1956   language:English language
Release Date:31-Dec-1955   technical committee:ISO/TC 8 - Ships and marine technology
Drafting committee:ISO/TC 8 - Ships and marine technology   ICS number:47.020.01 - General standards related to shipbuilding and marine structures
IS0
INTERN AT1 ON AL ORGANIZATION FOR STAN DA RD IZATl O N
IS0 RECOMMENDATION
R 19
SHIPBUILDING DETAILS FOR SEA NAVIGATION
DECKBOLTS
Isf EDITION
October 1956
COPYRIGHT RESERVED
The copyright of IS0 Recommendations and IS0 Standards
belongs to IS0 Member Bodies. Reproduction of these
documents, in any country, may be authorized therefore only
by the national standards organization of that country, being
a member of ISO.
For each individual country the only valid standard is the national standard of that country.
Printed in Switzerland
Also issued in French and Russian. Copies to be obtained through the national standards organizations.

---------------------- Page: 1 ----------------------
BRIEF HISTORY
The IS0 Recommendation R 19, Deckbolts, was drawn up by the Technical
Committee IS0 /TC 8, Shipbuilding Details for Sea Navigation, the Secretariat
of which is held by the Hoofdcommissie voor de Normalisatie in Nederland
(H. C. N. N.).
The Technical Committee, at its first meeting, held in Pans in June 1949,
unanimously decided to adopt as a basis of discussion the ISA Bulletin 17,
item 3, published in 1938 by the former International Federation of the National
Standardizing Associations (ISA), and also the French Standard J 35-220,
published in 1947. It was agreed to add to the nominal diameters of the ISA
Bulletin 17 the 14 mm diameter specified in the French Standard. It was also
decided to reduce to a minimum the lengths of the bolts so as to allow the
decks to wear out as much as possible before the deck plugs, fixed above the bolts,
come out or wear away.
The following Member Bodies took part in the meeting:
Belgium Italy Poland
Denmark (as Netherlands Portugal
observer) New Zealand Sweden
France Norway U. S. S. R.
The Draft Proposal drawn up on that basis by the ISO/TC 8 Secretanat
after the meeting was
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27