ISO/R 152:1960

Withdrawal of ISO/R 152-1960

ISO/R 152:1960

Name:ISO/R 152:1960   Standard name:Withdrawal of ISO/R 152-1960
Standard number:ISO/R 152:1960   language:English language
Release Date:30-Nov-1960   technical committee:ISO/TC 8 - Ships and marine technology
Drafting committee:ISO/TC 8 - Ships and marine technology   ICS number:47.020.01 - General standards related to shipbuilding and marine structures
UDC 629.12.011 Ref. No.: ISO/ R 152 - 1960 (E)
IS0
I N T E R N AT I O N A L ORGAN I ZAT I O N FOR S TA N DARD I Z AT1 O N
IS0 RECOMMENDATION
R 152
SHI PBU I LDI N G DETAl LS
MARKING OF WOODEN HATCHWAY COVERS
1st EDITION
February 1960
COPYRIGHT RESERVED
The copyright of IS0 Recommendations and IS0 Standards
belongs to IS0 Member Bodies. Reproduction of these
documents, in any country, may be authorized therefore only
by the national standards organization of that country, being
a member of ISO.
For each individual country the only valid standard is the national standard of that country.
Printed in Switzerland
Also issued in French and Russian. Copies to be obtained through the national standards organizations.

---------------------- Page: 1 ----------------------
BRIEF HISTORY
The IS0 Recommendation R 152, Marking of Wooden Hatchway Covers, was drawn
up by Technical Committee ISO/TC 8, Shipbuilding Details, the Secretariat of which is held
by the Stichting Nederlands Normalisatie-instituut (NNI).
Technical Committee ISO/TC 8, during its third meeting, held in Genoa, in November
1956, discussed a draft proposal based on the Netherlands Standard N 1333, concerning
the marking of wooden hatchway covers. This proposal was unanimously adopted by the
members of the Technical Committee present at that third meeting.
At the request of France, the Note on the fourth page was afterwards rectified to
provide that the decks be indicated if the hatchway beams are equally spaced. In this case,
the hatchway covers are of the same length and do not need transverse lines to indicate the
section of the hatchway of which these covers form part. The deck in which the hatchway
to be covered is situated must now be indicated by one transverse line of the colour used
for identifying the deck concerned.
The final letter ballot within the Technical Committee brought out the fact that
there were no objections to this draft and it was adopted as a Draft IS0 Recommendation.
On 4 December 1958, the Draft IS0 Recommendation (No. 261) was distributed to
all the IS0 Member Bodies and was approved by the following Member Bodies:
Austria France Spain
Belgium Israel Sweden
Bulgaria Italy Turkey
Burma Japan United Kingdom
Czechoslovakia Net herlands U.S.S.R.
Denmark Pakistan
Finland Romania
No Member Body opposed the approval of the Draft.
The Draft IS0 Recommendation was then submitted by correspondence to the IS0
Council, which decided, in February 1960, to accept it as an IS0 RECOMMENDATION.
-2-

---------------------- Page: 2 ----------------------
IS0 / R 152 - 1960 (E)
IS0 Recommendation R 152 February 1960
SHIPBUILDING DETAILS
MARKING OF WOODEN HATCHWAY COVERS
1. GENERAL
Each wooden hatchway cover carries following markings intended to locate
(a) the deck
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27