|
UDC 677.05
IS0
I N T E R N AT1 O NA L O R GAN I Z AT1 O N FOR STAN DAR D 1 ZATl O N
IS0 RECOMMENDATION
R 364
TWIN WIRE HEALDS FOR FRAME WEAVING
2nd EDITION
April 1967
This second edition supersedes the first edition.
COPYRIGHT RESERVED
The copyright of IS0 Recommendations and IS0 Standards
belongs to IS0 Member Bodies. Reproduction of these
documents, in any country, may be authorized therefore only
by the national standards organization of that country, being
a member of ISO.
For each individual country the only valid standard is the national standard of that country.
Printed in Switzerland
Also issued in French and Russian. Copies to be obtained through the national standards organizations.
---------------------- Page: 1 ----------------------
BRIEF HISTORY
The IS0 Recommendation R 364, Twin Wire Healds for Frame Weaving, was drawn up
by Technical Committee ISO/TC 72, Textile Machinery and Accessories, the Secretariat of which
is held by the Association Suisse de Normalisation (SNV).
Work on this question by the Technical Committee began in 1950 and led, in 1959, to the
adoption of a Draft IS0 Recommendation.
This first Draft IS0 Recommendation (No.335) was circulated to all the IS0 Member
Bodies for enquiry, in November 1959. As the results of this consultation were not considered
satisfactory, the Technical Committee presented a second Draft IS0 Recommendation, which
was circulated to all the Member Bodies in August 1961, and which was approved by the
following Member Bodies :
Australia Greece Spain
Austria Italy Switzerland
Brazil Japan Turkey
Bulgaria Netherlands United Kingdom
Chile New Zealand U.S.S.R.
France Poland
Germany Portugal
Two Member Bodies opposed the approval of the Draft:
Czechoslovakia,
India.
The Draft IS0 Recommendation was then submitted by correspondence to the IS0
Council, which decided, in April 1964, to accept it as an IS0 RECOMMENDATION.
BRIEF HISTORY RELATING TO THE 2nd EDITION
Secretariat of the Technical Committee having drawn up a draft proposal for the revision of IS0 Recom-
mendation R 364-1964, Twin Wire Healds for Frame W
...