|
Technical Specification
Universal Mobile Telecommunications System (UMTS);
Radio Resource Control (RRC);
Protocol specification
(3GPP TS 25.331 version 8.3.0 Release 8)
---------------------- Page: 1 ----------------------
3GPP TS 25.331 version 8.3.0 Release 8 1 ETSI TS 125 331 V8.3.0 (2008-07)
Reference
RTS/TSGR-0225331v830
Keywords
UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 25.331 version 8.3.0 Release 8 2 ETSI TS 125 331 V8.3.0 (2008-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 25.331 version 8.3.0 Release 8 3 ETSI TS 125 331 V8.3.0 (2008-07)
Contents
Intellectual Property Rights.2
Foreword.2
Foreword.32
1 Scope.33
2 References.33
3 Definitions and abbreviations.35
3.1 Definitions.35
3.2 Abbreviations.36
4 General.38
4.1 Overview of the specification.38
4.2 RRC Layer Model.39
4.3 Protocol specification principles .42
5 RRC Functions and Services provided to upper layers.42
5.1 RRC Functions.42
5.2 RRC Services provided to upper layers.43
5.3 Primitives between RRC and upper layers .43
6 Services expected from lower layers.43
6.1 Services expected from Layer 2 .43
6.2 Services expected from Layer 1 .43
6.3 Signalling Radio Bearers.43
7 Protocol states .44
7.1 Overview of RRC States and State Transitions including GSM .44
7.2 Processes in UE modes/states.45
7.2.1 UE Idle mode.45
7.2.2 UTRA RRC Connected mode.45
7.2.2.1 URA_PCH or CELL_PCH state .45
7.2.2.2 CELL_FACH state.46
7.2.2.3 CELL_DCH state.47
8 RRC procedures.48
8.1 RRC Connection Management Procedures .48
8.1.1 Broadcast of system information .48
8.1.1.1 General.49
8.1.1.1.1 System information structure.49
8.1.1.1.2 System information blocks .49
8.1.1.1.3 Segmentation and concatenation of system information blocks.55
8.1.1.1.4 Re-assembly of segments .56
8.1.1.1.5 Scheduling of system information.57
8.1.1.2 Initiation.57
8.1.1.3 Reception of SYSTEM INFORMATION messages by the UE.57
8.1.1.4 Void.58
8.1.1.5 Actions upon reception of the Master Information Block and Scheduling Block(s).58
8.1.1.6 Actions upon reception of system information blocks .61
8.1.1.6.1 System Information Block type 1.62
8.1.1.6.2 System Information Block type 2.63
8.1.1.6.3 System Information Block type 3.63
8.1.1.6.4 System Information Block type 4.67
8.1.1.6.5 System Information Block type 5 and 5bis.67
8.1.1.6.6 System Information Block type 6.70
8.1.1.6.7 System Information Block type 7.72
8.1.1.6.8 Void.72
8.1.1.6.9 Void.72
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 25.331 version 8.3.0 Release 8 4 ETSI TS 125 331 V8.3.0 (2008-07)
8.1.1.6.10 Void.72
8.1.1.6.11 System Information Block type 11.72
8.1.1.6.11a System Information Block type 11bis .74
8.1.1.6.12 System Information Block type 12.75
8.1.1.6.13 System Information Block type 13.76
8.1.1.6.14 System Information Block type 14.76
8.1.1.6.15 System Information Block type 15.77
8.1.1.6.15.0 System Information Block type 15bis.77
8.1.1.6.15.1 System Information Block type 15.1 .77
8.1.1.6.15.1a System Information Block type 15.1bis.77
8.1.1.6.15.2 System Information Block type 15.2 .77
8.1.1.6.15.2a System Information Block type 15.2bis.78
8.1.1.6.15.3 System Information Block type 15.3 .78
8.1.1.6.15.3a System Information Block type 15.3bis.79
8.1.1.6.15.4 System Information Block type 15.4 .80
8.1.1.6.15.5 System Information Block type 15.5 .80
8.1.1.6.15.6 System Information Block type 15.6 .80
8.1.1.6.15.7 System Information Block type 15.7 .80
8.1.1.6.15.8 System Information Block type 15.8 .80
8.1.1.6.16 System Information Block type 16.80
8.1.1.6.17 System Information Block type 17.81
8.1.1.6.18 System Information Block type 18.81
8.1.1.7 Modification of system information.82
8.1.1.7.1 Modification of system information blocks using a value tag.82
8.1.1.7.2 Synchronised modification of system information blocks.83
8.1.1.7.3 Actions upon system information change.83
8.1.1.7.4 Actions upon expiry of a system information expiry timer .84
8.1.2 Paging.84
8.1.2.1 General.84
8.1.2.2 Initiation.85
8.1.2.3 Reception of a PAGING TYPE 1 message by the UE.85
8.1.3 RRC connection establishment.87
8.1.3.1 General.87
8.1.3.2 Initiation.87
8.1.3.3 RRC CONNECTION REQUEST message contents to set.88
8.1.3.4 Reception of an RRC CONNECTION REQUEST message by the UTRAN.89
8.1.3.5 Cell re-selection, T300 or T318 timeout .90
8.1.3.5a Abortion of RRC connection establishment.91
8.1.3.6 Reception of an RRC CONNECTION SETUP message by the UE.91
8.1.3.7 Physical channel failure or cell re-selection.94
8.1.3.8 Invalid RRC CONNECTION SETUP message, unsupported configuration or invalid
configuration .95
8.1.3.9 Reception of an RRC CONNECTION REJECT message by the UE .96
8.1.3.10 Invalid RRC CONNECTION REJECT message.98
8.1.4 RRC connection release.99
8.1.4.1 General.99
8.1.4.2 Initiation.99
8.1.4.3 Reception of an RRC CONNECTION RELEASE message by the UE.100
8.1.4.4 Invalid RRC CONNECTION RELEASE message.101
8.1.4.5 Cell re-selection or radio link failure .102
8.1.4.6 Expiry of timer T308, unacknowledged mode transmission.102
8.1.4.7 Void.103
8.1.4.8 Reception of an RRC CONNECTION RELEASE COMPLETE message by UTRAN .103
8.1.4.9 Unsuccessful transmission of the RRC CONNECTION RELEASE COMPLETE message,
acknowledged mode transmission.103
8.1.4.10 Detection of loss of dedicated physical channel by UTRAN in CELL_DCH state .103
8.1.4.11 Failure to receive RRC CONNECTION RELEASE COMPLETE message by UTRAN.103
8.1.4a RRC connection release requested by upper layers .104
8.1.4a.1 General.104
8.1.4a.2 Initiation.104
8.1.5 Void.104
8.1.6 Transmission of UE capability information.104
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 25.331 version 8.3.0 Release 8 5 ETSI TS 125 331 V8.3.0 (2008-07)
8.1.6.1 General.104
8.1.6.2 Initiation.104
8.1.6.3 Reception of a UE CAPABILITY INFORMATION message by the UTRAN.105
8.1.6.4 Reception of the UE CAPABILITY INFORMATION CONFIRM message by the UE .106
8.1.6.5 Invalid UE CAPABILITY INFORMATION CONFIRM message .106
8.1.6.6 T304 timeout.107
8.1.7 UE capability enquiry .107
8.1.7.1 General.107
8.1.7.2 Initiation.107
8.1.7.3 Reception of a UE CAPABILITY ENQUIRY message by the UE .108
8.1.7.4 Invalid UE CAPABILITY ENQUIRY message .108
8.1.8 Initial Direct transfer.108
8.1.8.1 General.108
8.1.8.2 Initiation of Initial direct transfer procedure in the UE.108
8.1.8.2a RLC re-establishment or inter-RAT change .110
8.1.8.2ab Inter-RAT handover from UTRAN to GERAN Iu mode.111
8.1.8.2b Abortion of signalling connection establishment.111
8.1.8.3 Reception of INITIAL DIRECT TRANSFER message by the UTRAN .111
8.1.9 Downlink Direct transfer .111
8.1.9.1 General.111
8.1.9.2 Initiation of downlink direct transfer procedure in the UTRAN .111
8.1.9.3 Reception of a DOWNLINK DIRECT TRANSFER message by the UE .112
8.1.9.3a No signalling connection exists.112
8.1.9.4 Invalid DOWNLINK DIRECT TRANSFER message .112
8.1.10 Uplink Direct transfer .113
8.1.10.1 General.113
8.1.10.2 Initiation of uplink direct transfer procedure in the UE .113
8.1.10.2a RLC re-establishment or inter-RAT change .114
8.1.10.2b Inter-RAT handover from UTRAN to GERAN Iu mode.114
8.1.10.3 Reception of UPLINK DIRECT TRANSFER message by the UTRAN .114
8.1.11 UE dedicated paging.114
8.1.11.1 General.114
8.1.11.2 Initiation.114
8.1.11.3 Reception of a PAGING TYPE 2 message by the UE.115
8.1.11.4 Invalid PAGING TYPE 2 message.115
8.1.12 Security mode control.116
8.1.12.1 General.116
8.1.12.2 Initiation.116
8.1.12.2.1 Ciphering configuration change .116
8.1.12.2.2 Integrity protection configuration change.117
8.1.12.3 Reception of SECURITY MODE COMMAND message by the UE .119
8.1.12.3.1 New ciphering and integrity protection keys.123
8.1.12.4 Void.124
8.1.12.4a Incompatible simultaneous security reconfiguration.124
8.1.12.4b Cell update procedure during security reconfiguration .125
8.1.12.4c Invalid configuration.126
8.1.12.5 Reception of SECURITY MODE COMPLETE message by the UTRAN .126
8.1.12.6 Invalid SECURITY MODE COMMAND message.128
8.1.13 Signalling connection release procedure.129
8.1.13.1 General.129
8.1.13.2 Initiation of SIGNALLING CONNECTION RELEASE by the UTRAN.129
8.1.13.3 Reception of SIGNALLING CONNECTION RELEASE by the UE.129
8.1.13.4 Invalid SIGNALLING CONNECTION RELEASE message.129
8.1.13.5 Invalid configuration.130
8.1.14 Signalling connection release indication procedure.130
8.1.14.1 General.130
8.1.14.2 Initiation.130
8.1.14.2a RLC re-establishment or inter-RAT change .131
8.1.14.3 Reception of SIGNALLING CONNECTION RELEASE INDICATION by the UTRAN .131
8.1.15 Counter check procedure .131
8.1.15.1 General.132
8.1.15.2 Initiation.132
ETSI
---------------------- Page: 6 ----------------------
3GPP TS 25.331 version 8.3.0 Release 8 6 ETSI TS 125 331 V8.3.0 (2008-07)
8.1.15.3 Reception of a COUNTER CHECK message by the UE.132
8.1.15.4 Reception of the COUNTER CHECK RESPONSE message by UTRAN .133
8.1.15.5 Cell re-selection.133
8.1.15.6 Invalid COUNTER CHECK message.
...