ETSI TS 122 083 V17.0.0 (2022-04)

Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Call Waiting (CW) and Call Holding (HOLD); Supplementary Services; Stage 1 (3GPP TS 22.083 version 17.0.0 Release 17)

ETSI TS 122 083 V17.0.0 (2022-04)

Name:ETSI TS 122 083 V17.0.0 (2022-04)   Standard name:Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Call Waiting (CW) and Call Holding (HOLD); Supplementary Services; Stage 1 (3GPP TS 22.083 version 17.0.0 Release 17)
Standard number:ETSI TS 122 083 V17.0.0 (2022-04)   language:English language
Release Date:   technical committee:3GPP SA 1 - Services
Drafting committee:   ICS number:
ETSI TS 122 083 V17.0.0 (2022-04)






TECHNICAL SPECIFICATION
Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS);
Call Waiting (CW) and Call Holding (HOLD);
Supplementary Services;
Stage 1
(3GPP TS 22.083 version 17.0.0 Release 17)

R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS

---------------------- Page: 1 ----------------------
3GPP TS 22.083 version 17.0.0 Release 17 1 ETSI TS 122 083 V17.0.0 (2022-04)

Reference
RTS/TSGS-0122083vh00
Keywords
GSM,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
warranty is made of merchantability or fitness
and/or governmental rule and/or regulation and further, no representation or
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
3GPP TS 22.083 version 17.0.0 Release 17 2 ETSI TS 122 083 V17.0.0 (2022-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under .
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 22.083 version 17.0.0 Release 17 3 ETSI TS 122 083 V17.0.0 (2022-04)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 5
0 Scope . 6
0.1 References . 6
0.2 Abbreviations . 6
1 Call Waiting (CW) . 6
1.1 Definition . 6
1.2 Description . 7
1.2.1 Description . 7
1.2.2 Applicability to telecommunication services . 7
1.2.3 Terminology . 7
1.3 Normal procedures with successful outcome . 7
1.3.1 Provision . 7
1.3.2 Withdrawal . 7
1.3.5 Activation . 7
1.3.6 Deactivation . 8
1.3.7 Invocation . 8
1.3.8 Normal operation with successful outcome . 8
1.3.8.1 Incoming call from C . 8
1.3.8.2 Terminating call by A or B . 8
1.3.11 Interrogation . 8
1.4 Exceptional procedures or unsuccessful outcome . 8
1.4.1 Incoming call from subscriber C ignored by subscriber B. 8
1.4.2 Incoming call from subscriber C is indicated as UDUB by subscriber B (or terminal B) . 9
1.4.3 Release by subscriber C within the specified period . 9
1.4.4 Incoming call from subscriber C is rejected by subscriber B . 9
1.5 Alternate procedures . 9
1.6 Interactions with other Supplementary Services . 9
1.6.82.1 Call forwarding unconditional . 9
1.6.82.2 Call forwarding on mobile subscriber busy . 9
1.6.82.3 Call forwarding on no reply . 9
1.6.83.2 Call hold . 9
1.6.81.1 Calling line identification presentation . 9
1.6.84.2 MultiParty . 10
1.6.88.6 Barring of all incoming calls . 10
1.6.88.7 Barring of incoming calls when roaming outside the home PLMN country . 10
1.7 Interactions with other services . 10
1.7.1 Multicall . 10
1.8 Interworking considerations . 10
2 Call hold . 10
2.1 Definition . 10
2.2 Description . 10
2.2.1 Description . 10
2.2.2 Applicability to telecommunication services . 11
2.3 Normal procedures with successful outcome . 11
2.3.1 Provision . 11
2.3.2 Withdrawal . 11
2.3.5 Activation . 11
2.3.6 Deactivation . 11
2.3.7 Invocation . 11
2.3.8 Normal operation with successful outcome . 11
2.4 Exceptional procedures or unsuccessful outcome . 13
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 22.083 version 17.0.0 Release 17 4 ETSI TS 122 083 V17.0.0 (2022-04)
2.4.1 Exceptional operation or unsuccessful outcome . 13
2.4.6 Invocation . 13
2.5 Alternate procedures . 13
2.6 Interactions with other Supplementary Services . 13
2.6.83.1 Call waiting . 13
2.6.84.2 MultiParty . 13
2.7 Interactions with other services . 13
2.7.1 Multicall . 13
2.8 Interworking considerations . 13
Annex A (informative): Change history . 14
History . 15

ETSI

---------------------- Page: 5 ----------------------
3GPP TS 22.083 version 17.0.0 Release 17 5 ETSI TS 122 083 V17.0.0 (2022-04)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI

---------------------- Page: 6 ----------------------
3GPP TS 22.083 version 17.0.0 Release 17 6 ETSI TS 122 083 V17.0.0 (2022-04)
0 Scope
The present document describes the Supplementary Services belonging to the group Call Completion Supplementary
Services.
The general aspects, including definitions and recommended provision, of the description of Supplementary Services
are given in specification TS 22.004 [2].
The group of Call Completion Supplementary Services is divided into the following two Supplementary Services:
- Call waiting (clause 1);
- Call hold (clause 2).
0.1 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[2] 3GPP TS 22.004: "General on Supplementary Services".
[3] 3GPP TS 22.030: "Man-Machine Interface (MMI) of the Mobile Station (MS)".
[4] 3GPP TS 22.081: "Line identification Supplementary Services - Stage 1".
[5] 3GPP TS 22.084: "Digital cellular telecommunication system; MultiParty (MPTY) Supplementary
Services - Stage 1".
[6] 3GPP TS 22.135: "Multicall Stage 1".
0.2 Abbreviations
Abbreviations used in the present document are listed in TR 21.905 [1].
1 Call Waiting (CW)
1.1 Definition
The Call Waiting Servi
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27