ETSI TS 122 081 V15.0.0 (2018-07)

Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Line Identification supplementary services; Stage 1 (3GPP TS 22.081 version 15.0.0 Release 15)

ETSI TS 122 081 V15.0.0 (2018-07)

Name:ETSI TS 122 081 V15.0.0 (2018-07)   Standard name:Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Line Identification supplementary services; Stage 1 (3GPP TS 22.081 version 15.0.0 Release 15)
Standard number:ETSI TS 122 081 V15.0.0 (2018-07)   language:English language
Release Date:11-Jul-2018   technical committee:3GPP SA 1 - Services
Drafting committee:   ICS number:
ETSI TS 122 081 V15.0.0 (2018-07)






TECHNICAL SPECIFICATION
Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS);
Line Identification supplementary services;
Stage 1
(3GPP TS 22.081 version 15.0.0 Release 15)

R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS

---------------------- Page: 1 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 1 ETSI TS 122 081 V15.0.0 (2018-07)



Reference
RTS/TSGS-0122081vf00
Keywords
GSM,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 2 ETSI TS 122 081 V15.0.0 (2018-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 3 ETSI TS 122 081 V15.0.0 (2018-07)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 5
0 Scope . 6
0.1 References . 7
0.2 Abbreviations . 7
1 Calling Line Identification Presentation (CLIP) . 7
1.1 Definition . 7
1.2 Description . 7
1.2.1 Description . 7
1.2.2 Applicability to telecommunication services . 7
1.3 Normal procedures with successful outcome . 8
1.3.1 Provision . 8
1.3.2 Withdrawal . 8
1.3.5 Activation . 8
1.3.6 Deactivation . 8
1.3.7 Invocation . 8
1.3.8 Normal operation with successful outcome . 8
1.3.11 Interrogation . 8
1.4 Exceptional procedures or unsuccessful outcome . 9
1.5 Alternate procedures . 9
1.6 Interactions with other Supplementary Services . 9
1.6.81.2 Calling line identification restriction . 9
1.6.82.1 Call forwarding unconditional . 9
1.6.82.2 Call forwarding on mobile subscriber busy . 9
1.6.82.3 Call forwarding on no reply . 9
1.6.82.4 Call forwarding on mobile subscriber not reachable . 9
1.6.83.1 Call Waiting . 9
1.6.88.8 Anonymous Call Rejection . 9
1.7 Interworking considerations . 9
2 Calling Line Identification Restriction (CLIR) . 10
2.1 Definition . 10
2.2 Description . 10
2.2.1 Description . 10
2.2.2 Applicability to telecommunications services . 10
2.3 Normal procedures with successful outcome . 10
2.3.1 Provision . 10
2.3.2 Withdrawal . 10
2.3.5 Activation . 10
2.3.6 Deactivation . 10
2.3.7 Invocation . 10
2.3.8 Normal operation with successful outcome . 11
2.3.11 Interrogation . 11
2.4 Exceptional procedures or unsuccessful outcome . 11
2.5 Alternate Procedures . 11
2.6 Interactions with other Supplementary Services . 11
2.6.81.1 Calling line identification presentation . 11
2.6.82.1 Call forwarding unconditional . 11
2.6.82.2 Call forwarding on mobile subscriber busy . 11
2.6.82.3 Call forwarding on no reply . 11
2.6.82.4 Call forwarding on mobile subscriber not reachable . 11
2.7 Interworking considerations . 12
3 Connected Line Identification Presentation (COLP) . 12
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 4 ETSI TS 122 081 V15.0.0 (2018-07)
3.1 Definition . 12
3.2 Description . 12
3.2.1 Description . 12
3.2.2 Applicability to telecommunication services . 12
3.3 Normal procedure with successful outcome . 12
3.3.1 Provision . 12
3.3.2 Withdrawal . 13
3.3.5 Activation . 13
3.3.6 Deactivation . 13
3.3.7 Invocation . 13
3.3.8 Normal operation with successful outcome . 13
3.3.11 Interrogation . 13
3.4 Exceptional procedures or unsuccessful outcome . 13
3.5 Alternate procedures . 13
3.6 Interactions with other Supplementary Services . 13
3.6.81.4 Connected line identification restriction . 13
3.6.82.1 Call forwarding unconditional . 13
3.6.82.2 Call forwarding on mobile subscriber busy . 14
3.6.82.3 Call forwarding on no reply . 14
3.6.82.4 Call forwarding on mobile subscriber not reachable . 14
3.6.84.1 Multiparty. 14
3.7 Interworking considerations . 14
4 Connected Line Identification Restriction (COLR) . 14
4.1 Definition . 14
4.2 Description . 14
4.2.1 Description . 14
4.2.2 Applicability to telecommunications services . 14
4.3 Normal procedures with successful outcome . 14
4.3.1 Provision . 14
4.3.2 Withdrawal . 14
4.3.5 Activation . 14
4.3.6 Deactivation . 15
4.3.7 Invocation . 15
4.3.8 Normal operation with successful outcome . 15
4.3.11 Interrogation . 15
4.4 Exceptional procedures or unsuccessful outcome . 15
4.5 Alternate procedures . 15
4.6 Interactions with other Supplementary Services . 15
4.6.81.3 Connected line identification presentation . 15
4.6.82.1 Call forwarding unconditional . 15
4.6.82.2 Call forwarding on mobile subscriber busy . 15
4.6.82.3 Call forwarding on no reply . 15
4.6.82.4 Call forwarding on mobile subscriber not reachable . 15
4.7 Interworking consideration . 16
Annex A (informative): Change history . 17
History . 18

ETSI

---------------------- Page: 5 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 5 ETSI TS 122 081 V15.0.0 (2018-07)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI

---------------------- Page: 6 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 6 ETSI TS 122 081 V15.0.0 (2018-07)
0 Scope
The present document describes the Supplementary Services belonging to the group Line Identification Supplementary
Services.
The general aspects, including definitions and recommended provision, of the description of the Supplementary
Services are given in 3GPP TS 22.004.
The group of Line Identification Supplementary Services is divided into the following four Supplementary Services:
CLIP - Calling line identification presentation (clause 1);
CLIR - Calling line identification restriction (clause 2);
COLP - Connected line identification presentation (clause 3);
COLR - Connected line identification restriction (clause 4).
Definition of line identity: The line identity is made up of a number of information units:
- the subscriber's national ISDN/MSISDN number (MSISDN number is the number stored in the VLR);
- the country code;
- optionally, subaddress information. The PLMN cannot be responsible for the content of this subaddress. (For
definition of the subaddress see ITU-T Recommendation E.164 [3] subclause 11.2).
In a full ISDN environment, the line identity shall include all the address information necessary to
unambiguously identify a subscriber.
The calling line identity is the line identity of the calling party.
The connected line identity is the line identity of the connected party.
If for the line identity of the calling party or the connected party additional line identification is received (additional
calling party/connected party number) in a PLMN this additional line identification shall be used for the presentation
purpose of the line identification presentation services.
Definition of Presentation and Screening Indicators: In addition to or instead of the line identity, the network may
give a Presentation Indicator (PI) and/or a Screening Indicator (SI) to the served subscriber. The following information
may be given:
- Presentation Indicator showing:
a) presentation allowed, or
b) presentation restricted, or
c) number not available due to interworking;
If Presentation Indicator is set to "Presentation Restricted", then the MS can get additional information on the Cause of
no CLI, if provided by the network.
The Cause of no CLI value may be one of the following :
- Unavailable
- reject by user
- interaction with other services
- coin line / pay phone
- Screening Indicator showing:
a) user provided, verified and passed, or
ETSI

---------------------- Page: 7 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 7 ETSI TS 122 081 V15.0.0 (2018-07)
b) user provided, not screened, or
c) network provided.
If the line identity is that of a PLMN subscriber, then:
the national number and the country code shall always be provided by the network;
the subaddress shall only be included if it is provided by the user (or user equipment);
the screening indicator shall indicate "network provided".
0.1 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TR 21.905: " Vocabulary for 3GPP Specifications ".
[2] 3GPP TS 22.004: General on Supplementary Services".
[3] ITU-T Recommendation E.164: "Numbering plan for the ISDN era".
[4] 3GPP TS 22.088: “Call Barring (CB) supplementary services – Stage 1”.
0.2 Abbreviations
Abbreviations used in the present document are listed in 3GPP TR 21.905 [1].
1 Calling Line Identification Presentation (CLIP)
1.1 Definition
The CLIP Supplementary Service provides the called party with the possibility to receive the line identity of the calling
party.
1.2 Description
1.2.1 Description
This Supplementary Service provides for the ability to indicate the line identity of the calling party to the called party.
The network shall deliver the calling line identity to the called party at call set-up time, regardless of the terminal
capability to handle the information.
1.2.2 Applicability to telecommunication services
The applicability of this Supplementary Service is defined in 3GPP TS 22.004 [2].
ETSI

---------------------- Page: 8 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 8 ETSI TS 122 081 V15.0.0 (2018-07)
1.3 Normal procedures with successful outcome
1.3.1 Provision
This Supplementary Service is provisioned for all Basic Services subscribed to and to which it is applicable, i.e. not
provisioned for any subset of these Basic Services.
Override category within a PLMN
Override category within an ISDN/PLMN. Depending on national regulations, some networks may define
categories of subscribers that have the ability to override the presentation restriction (CLIR, clause 2) and have
the calling line identity presented (e.g., the police). The ability to have such override category is a national
option.
Override category between a PLMN and a network providing calling line identification restriction
Override category between ISDN/PLMNs. When a call originates in one ISDN/PLMN and terminates in another
ISDN/PLMN and the CLIR Supplementary Service is applied, the rules and regulations of the destination
network shall apply. For example, the override category may not be applicable in the originating network but
may be applicable in the destination network. In this situation, a call with the CLIR Supplementary Service
applied can still be overridden in the destination network.
The override category is only applicable within the HPLMN country.
1.3.2 Withdrawal
The CLIP Supplementary Service shall be withdrawn at the customer's request or for administrative reasons.
1.3.5 Activation
The CLIP Supplementary Service is activated as a result of provision.
1.3.6 Deactivation
The CLIP Supplementary Service is deactivated as a result of withdrawal.
1.3.7 Invocation
The network shall automatically invoke the CLIP Supplementary Service in the call set-up phase.
1.3.8 Normal operation with successful outcome
A user who has subscribed to the CLIP Supplementary Service and receives a call shall also receive the line identity of
the calling party.
Note: The decision of whether the user-defined name stored in the handset should take precedence over the line
identity of the calling party is a handset implementation issue. However for user experience it may be
preferable to display the user-defined name available. In case there are several names associated with the
number it is up to the handset implementation to choose which name to display.
In addition to or instead of the calling line identity, the subscriber may be given a Presentation Indicator and/or a
Screening Indicator with the relevant information. If provided by the network, the subscriber may also be given some
additional information on the Cause of no CLI in case of a presentation restricted.
1.3.11 Interrogation
Status check
The mobile subscriber can request the status of the Supplementary Service and be informed if the service is provided to
her.
ETSI

---------------------- Page: 9 ----------------------
3GPP TS 22.081 version 15.0.0 Release 15 9 ETSI TS 122 081 V15.0.0 (2018-07)
1.4 Exceptional procedures
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27