ETSI TS 131 124 V14.5.0 (2018-07)

Universal Mobile Telecommunications System (UMTS); LTE; Mobile Equipment (ME) conformance test specification; Universal Subscriber Identity Module Application Toolkit (USAT) conformance test specification (3GPP TS 31.124 version 14.5.0 Release 14)

ETSI TS 131 124 V14.5.0 (2018-07)

Name:ETSI TS 131 124 V14.5.0 (2018-07)   Standard name:Universal Mobile Telecommunications System (UMTS); LTE; Mobile Equipment (ME) conformance test specification; Universal Subscriber Identity Module Application Toolkit (USAT) conformance test specification (3GPP TS 31.124 version 14.5.0 Release 14)
Standard number:ETSI TS 131 124 V14.5.0 (2018-07)   language:English language
Release Date:12-Jul-2018   technical committee:3GPP CT 6 - Smart Card Application Aspects (formely T3)
Drafting committee:   ICS number:
ETSI TS 131 124 V14.5.0 (2018-07)






TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
Mobile Equipment (ME) conformance test specification;
Universal Subscriber Identity Module Application
Toolkit (USAT) conformance test specification
(3GPP TS 31.124 version 14.5.0 Release 14)

---------------------- Page: 1 ----------------------
3GPP TS 31.124 version 14.5.0 Release 14 1 ETSI TS 131 124 V14.5.0 (2018-07)



Reference
RTS/TSGC-0631124ve50
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 31.124 version 14.5.0 Release 14 2 ETSI TS 131 124 V14.5.0 (2018-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 31.124 version 14.5.0 Release 14 3 ETSI TS 131 124 V14.5.0 (2018-07)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 10
1 Scope . 11
2 References . 12
3 Definitions and abbreviations . 14
3.1 Mobile station definition and configurations . 14
3.2 Applicability . 14
3.2.1 Applicability of the present document . 14
3.2.2 Applicability of the individual tests . 14
3.2.3 Applicability to terminal equipment . 14
3.2.4 Definitions . 14
3.2.4.1 Format of the table of optional features . 14
3.2.4.2 Format of the applicability table . 15
3.2.4.3 Status and notations. 15
3.3 Table of optional features . 16
3.4 Applicability table . 26
3.5 Conventions for mathematical notations . 89
3.5.1 Mathematical signs . 89
4 Test equipment . 89
5 Testing methodology in general . 89
5.1 Testing of optional functions and procedures . 89
5.2 Test interfaces and facilities . 89
5.3 Information to be provided by the apparatus supplier . 89
6 Implicit testing . 90
7 Measurement uncertainty . 90
8 Format of tests . 90
9 Generic call set up procedures . 93
10 - 26 Not used . 93
27 Testing of the UICC/ME interface . 93
27.0 Introduction . 93
27.1 - 27.21 Void. 93
27.22 USIM Application Toolkit . 93
27.22.1A General Test purpose . 93
27.22.2A Definition of default values for USIM Application Toolkit testing . 94
27.22.2B Definition of default values for LTE related USIM Application Toolkit testing . 98
27.22.2B.1 Definition of E-UTRAN/EPC UICC . 98
27.22.2B.2 Definition of E-UTRAN parameters . 99
27.22.2C Definition of E-UTRAN/EPC ISIM-UICC . 100
27.22.2C.1 Applications on the E-UTRAN/EPC ISIM-UICC . 100
27.22.2C.2 Default USIM values of E-UTRAN/EPC ISIM-UICC . 100
27.22.2C.3 Default ISIM values of E-UTRAN/EPC ISIM-UICC . 100
27.22.2C.3.1 EF (Administrative Data) . 100
AD
27.22.2C.3.2 EF (ISIM Service Table) . 100
IST
27.22.2C.3.3 EF (IMS private user identity) . 100
IMPI
27.22.2C.3.4 EF (Home Network Domain Name) . 101
DOMAIN
27.22.2C.3.5 EF (IMS public user identity) . 101
IMPU
27.22.2C.3.6 EF (P-CSCF ADDRESS) . 102
P-CSCF
27.22.2C.3.7 EF (Short Message Service) . 102
SMS
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 31.124 version 14.5.0 Release 14 4 ETSI TS 131 124 V14.5.0 (2018-07)
27.22.2C.3.8 EF (Short message status reports) . 102
SMSR
27.22.2C.3.9 EF (Short message service parameters) . 102
SMSP
27.22.2C.3.10 EF (SMS Status) . 103
SMSS
27.22.2C.4 Default values at DF_TELECOM . 103
27.22.2C.4.1 EF (Public Service Identity of the SM-SC) . 103
PSISMSC
27.22.1 Initialization of USIM Application Toolkit Enabled UICC by USIM Application Toolkit Enabled
ME (Profile Download) . 103
27.22.1.1 Definition and applicability . 103
27.22.1.2 Conformance requirement . 103
27.22.1.3 Test purpose . 103
27.22.1.4 Method of test . 104
27.22.1.4.1 Initial conditions . 104
27.22.1.4.2 Procedure . 104
27.22.1.5 Test requirement . 104
27.22.2 Contents of the TERMINAL PROFILE command . 104
27.22.2.1 Definition and applicability . 104
27.22.2.2 Conformance requirement . 104
27.22.2.3 Test purpose . 104
27.22.2.4 Method of test . 105
27.22.2.4.1 Initial conditions . 105
27.22.1.4.2 Procedure . 105
27.22.2.5 Test requirement . 105
27.22.3 Servicing of proactive UICC commands . 105
27.22.3.1 Definition and applicability . 105
27.22.3.2 Conformance requirement . 105
27.22.3.3 Test purpose . 105
27.22.3.4 Method of test . 105
27.22.3.4.1 Initial conditions . 105
27.22.3.4.2 Procedure . 106
27.22.3.5 Test requirement . 106
27.22.4 Proactive UICC commands . 106
27.22.4.1 DISPLAY TEXT . 106
27.22.4.1.1 DISPLAY TEXT (Normal) . 106
27.22.4.1.2 DISPLAY TEXT (Support of "No response from user") . 107
27.22.4.1.3 DISPLAY TEXT (Display of extension text). 108
27.22.4.1.4 DISPLAY TEXT (Sustained text) . 108
27.22.4.1.5 DISPLAY TEXT (Display of icons) . 110
27.22.4.1.6 DISPLAY TEXT (UCS2 display in Cyrillic) . 111
27.22.4.1.7 DISPLAY TEXT (Variable Time out) . 112
27.22.4.1.8 DISPLAY TEXT (Support of Text Attribute) . 112
27.22.4.1.9 DISPLAY TEXT (UCS2 display in Chinese) . 119
27.22.4.1.10 DISPLAY TEXT (UCS2 display in Katakana) . 120
27.22.4.2 GET INKEY . 120
27.22.4.2.1 GET INKEY(normal) . 120
27.22.4.2.2 GET INKEY (No response from User) . 121
27.22.4.2.3 GET INKEY (UCS2 display in Cyrillic) . 122
27.22.4.2.4 GET INKEY (UCS2 entry in Cyrillic) . 122
27.22.4.2.5 GET INKEY ("Yes/No" Response) . 123
27.22.4.2.6 GET INKEY (display of Icon) . 124
27.22.4.2.7 GET INKEY (Help Information). 125
27.22.4.2.8 GET INKEY (Variable Time out) . 125
27.22.4.2.9 GET INKEY (Support of Text Attribute) . 126
27.22.4.2.10 GET INKEY (UCS2 display in Chinese) . 132
27.22.4.2.11 GET INKEY (UCS2 entry in Chinese) . 132
27.22.4.2.12 GET INKEY (UCS2 display in Katakana) . 133
27.22.4.2.13 GET INKEY (UCS2 entry in Katakana) . 134
27.22.4.3 GET INPUT . 134
27.22.4.3.1 GET INPUT (normal) . 134
27.22.4.3.2 GET INPUT (No response from User) . 136
27.22.4.3.3 GET INPUT (UCS2 display in Cyrillic) . 136
27.22.4.3.4 GET INPUT (UCS2 entry in Cyrillic) . 137
27.22.4.3.5 GET INPUT (default text) . 138
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 31.124 version 14.5.0 Release 14 5 ETSI TS 131 124 V14.5.0 (2018-07)
27.22.4.3.6 GET INPUT (display of Icon) . 138
27.22.4.3.7 GET INPUT (Help Information) . 139
27.22.4.3.8 GET INPUT (Support of Text Attribute) . 140
27.22.4.3.9 GET INPUT (UCS2 display in Chinese) . 146
27.22.4.3.10 GET INPUT (UCS2 entry in Chinese) . 147
27.22.4.3.11 GET INPUT (UCS2 display in Katakana) . 147
27.22.4.3.12 GET INPUT (UCS2 entry in Katakana) . 148
27.22.4.4 MORE TIME . 149
27.22.4.4.2 Conformance requirement . 149
27.22.4.4.3 Test purpose . 149
27.22.4.4.4 Method of test . 149
27.22.4.4.5 Test requirement . 149
27.22.4.5 PLAY TONE. 149
27.22.4.5.1 PLAY TONE (Normal) . 149
27.22.4.5.2 PLAY TONE (UCS2 display in Cyrillic) . 155
27.22.4.5.3 PLAY TONE (display of Icon) . 156
27.22.4.5.4 PLAY TONE (Support of Text Attribute) . 157
27.22.4.5.5 PLAY TONE (UCS2 display in Chinese) . 163
27.22.4.5.6 PLAY TONE (UCS2 display in Katakana) . 164
27.22.4.6 POLL INTERVAL . 165
27.22.4.6.1 Definition and applicability . 165
27.22.4.6.2 Conformance requirement . 165
27.22.4.6.3 Test purpose . 165
27.22.4.6.4 Method of test . 165
27.22.4.7 REFRESH . 165
27.22.4.7.1 REFRESH (normal) . 165
27.22.4.7.2 REFRESH (IMSI changing procedure) . 175
27.22.4.7.3 REFRESH (Steering of roaming) . 187
27.22.4.7.4 REFRESH (AID) . 205
27.22.4.7.5 REFRESH (IMSI changing procedure, E-UTRAN) . 208
27.22.4.8 SET UP MENU and ENVELOPE MENU SELECTION . 213
27.22.4.8.1 SET UP MENU (normal) and ENVELOPE MENU SELECTION . 213
27.22.4.8.2 SET UP MENU (help request support) and ENVELOPE MENU SELECTION . 214
27.22.4.8.3 SET UP MENU (next action support) and ENVELOPE MENU SELECTION . 215
27.22.4.8.4 SET UP MENU (display of icons) and ENVELOPE MENU SELECTION . 216
27.22.4.8.5 SET UP MENU (soft keys support) and ENVELOPE MENU SELECTION . 216
27.22.4.8.6 SET UP MENU (support of Text Attribute) and ENVELOPE MENU SELECTION . 217
27.22.4.8.7 SET UP MENU (UCS2 display in Cyrillic) and ENVELOPE MENU SELECTION . 224
27.22.4.8.8 SET UP MENU (UCS2 display in Chinese) and ENVELOPE MENU SELECTION . 225
27.22.4.8.9 SET UP MENU (UCS2 display in Katakana) and ENVELOPE MENU SELECTION . 226
27.22.4.9 SELECT ITEM . 227
27.22.4.9.1 SELECT ITEM (mandatory features for ME supporting SELECT ITEM) . 227
27.22.4.9.2 SELECT ITEM (next action support) . 228
27.22.4.9.3 SELECT ITEM (default item support) . 228
27.22.4.9.4 SELECT ITEM (help request support) . 229
27.22.4.9.5 SELECT ITEM (icons support) . 229
27.22.4.9.6 SELECT ITEM (presentation style) . 230
27.22.4.9.7 SELECT ITEM (soft keys support) . 231
27.22.4.9.8 SELECT ITEM (Support of "No response from user") . 231
27.22.4.9.9 SELECT ITEM (Support of Text Attribute). 232
27.22.4.9.10 SELECT ITEM (UCS2 display in Cyrillic) . 237
27.22.4.9.11 SELECT ITEM (UCS2 display in Chinese) . 238
27.22.4.9.12 SELECT ITEM (UCS2 display in Katakana) . 239
27.22.4.10 SEND SHORT MESSAGE .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27